Get Quote

Magnetic Drive Pumps

Leak-Prone Pumps in Chemical Lines Cause Frequent Shutdowns and Unsafe Working Conditions. Our Magnetic Drive Pumps remove seal failure risks entirely by using a fully enclosed, contact-free drive system.

Flow Rate Range

1 L/min to 500 L/min (0.26 GPM to 132 GPM) – High-capacity models available

Pressure/Head Capacity

Up to 25 bar (362 psi) – Single-stage designs

Power Requirements

0.1 kW to 55 kW (0.13 HP to 75 HP) – 3-phase motors, 50/60 Hz, VFD compatible

Materials of Construction

Casing: PP, PVDF, SS 316, Hastelloy Impeller: Ceramic, SS 316, Carbon Magnet: Samarium Cobalt (SmCo) or Neodymium (NdFeB)

Fluid Compatibility

Corrosives, Volatiles, High-Purity Fluids – Ideal for acids, solvents, and toxic liquids
Get Latest Price
Get quote

Product Description

You can benefit from lower fluid loss, zero VOC emissions, and fewer spare parts to stock. These magnetic drive pumps handle corrosive, volatile, and high-purity fluids across continuous-duty operations in chemical, pharma, and semiconductor plants.

Temperature Range

-40°C to 250°C (-40°F to 482°F)

Connection Types & Sizes

Flanged (ANSI/DIN), Threaded (BSP/NPT), Tri-Clamp (Sanitary) – Sizes: 15 mm to 100 mm (½” to 4″)

Mounting Configuration

Horizontal or Vertical – Close-coupled, foot-mounted, or ISO-standard baseplate

Magnetic Coupling Strength

Torque Range: 0.5 Nm to 300 Nm – Temperature-resistant magnets (up to 350°C with cooling)

Efficiency Rating

70% to 85% (lower than mechanical seal pumps due to eddy current losses)

NPSH Required

1.5 m to 5 m (5 ft to 16.4 ft)

Speed Range

1,450 RPM to 2,900 RPM – Lower speeds for viscous fluids

Solids Handling Capability

max 0.1% solids – Not for slurries/abrasives (risk of isolation gap clogging)

Certifications & Standards

ISO 5199, API 685, ATEX, FDA – Compliant for chemical, pharma, and hazardous areas

Operating Noise Level

< 70 dB(A) (quiet operation due to no mechanical contact)

Coupling System

Sealless Magnetic Drive – No physical shaft penetration (zero leakage)

Technical Advantages

Unlike traditional pumps with mechanical seals, our magnetic drive system operates without shaft penetration, preventing emissions and internal contamination. The wide temperature range from -40°C to 250°C supports both cryogenic and hot fluid duties in a single platform. 
Eddy current loss is reduced with high-grade Samarium Cobalt magnets, preserving torque even at elevated speeds and ambient heat. Every pump undergoes hydrostatic pressure testing and run-in trials to validate head, flow, and NPSHr values before shipment. 

Let's Get Started

Need reliable Flanges for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Contact us

Industry Applications

Fine Chemical Reactors

PP or PVDF casings resist strong acids while magnetic coupling prevents leak paths near operator zones.

Solvent Transfer Skids

Neodymium drive magnets maintain torque transfer for low-viscosity solvents with high vapor pressure.

Pharmaceutical Blending Units

Sanitary Tri-Clamp ports and FDA-compliant wetted parts ensure batch purity and clean-in-place compatibility.

Semiconductor Etching Stations

Hastelloy and ceramic internals prevent metal contamination under ultra-high purity demands.

Battery Electrolyte Handling

Sealless design eliminates air contact with reactive liquids like LiPF₆ and HF-based compounds

Hazardous Waste Recovery Systems

ISO 5199 and ATEX ratings meet site safety codes for flammable or toxic fluid recirculation. 

Magnetic Drive Pumps

Application-Fit Pumping Without Sealing Failures

OEMs and project buyers receive complete configuration control including casing material, impeller type, and magnetic torque rating. We supply VFD-compatible models with ISO baseplate or close-coupled frames to match space and motor preferences. 
Each unit includes traceable documentation for API 685 or ATEX Zone 1 compliance when specified. From corrosive loading bays to high-purity filling lines, our pumps reduce fluid loss, safety risks, and long-term service costs. 

Magnetic Drive Pumps

Related products

Having Doubts? Our FAQ

Check all our Frequently Asked Question

Can we specify exact casing and impeller material combinations based on our fluid profile?

Yes, we allow full customization of wetted parts based on the fluid’s chemical resistance needs. Buyers often choose combinations like Hastelloy casing with carbon or ceramic impellers for acid handling. We validate all selections using compatibility charts and past performance data. 

Do you offer support for pump sizing based on specific head and flow rate curves?

We size the pump based on your system’s flow and pressure drop values instead of offering fixed models. Each build comes with performance curves, torque load data, and NPSHr mapping. This eliminates mismatch issues during installation or commissioning.

Can we define specific connection types and sizes based on our piping layout?

Yes, we support flanged (ANSI or DIN), threaded (BSP/NPT), and tri-clamp connections from 15 mm to 100 mm. You can match inlet and outlet sizes independently based on your skid or pipeline needs. We also accommodate reducers or adaptors if transition fittings are required.

What if our fluid contains trace solids or has vapor pressure risks?

We assess isolation gap clearance and internal flushing options if solids or degassing risk exists. For trace solids, we limit design to 0.1% and can include optional purge features. We can also build in external cooling jackets for vapor pressure control.

Do you offer different motor-mounting or VFD-ready integration options?

Yes, we support both horizontal and vertical mounting with options like close-coupled or baseplate formats. All motors are VFD-compatible with standard 50/60Hz ratings. This reduces the need for motor reconfiguration or extra drive unit investments.

Do you provide complete documentation packages for compliance and audits?
  • Full documentation set including GA drawings, P&IDs, and datasheets 
  • Material Test Certificates (MTC) and traceability records for wetted parts 
  • API 685 / ATEX / ISO 5199 compliance documents (as required) 
  • Factory Acceptance Test (FAT) reports with performance validation 
  • Digital documentation support for EPC and global project approvals 
Can Frigate support bulk orders or project-based supply requirements?
  • Scalable production capacity for OEM and EPC project demands 
  • Batch-wise manufacturing with consistent quality control 
  • Dedicated project coordination for timelines and delivery tracking 
  • Flexible logistics support including export packaging and documentation 
  • Long-term supply agreements for repeat procurement cycles 
Do you offer pre-configured skid or system integration support?
  • Custom pump integration into skid-mounted systems 
  • Alignment with piping layout, valves, and instrumentation 
  • Optional inclusion of VFD panels and control systems 
  • Plug-and-play assemblies for faster on-site commissioning 
  • Reduced installation time and engineering overhead 
What after-sales and technical support does Frigate provide?
  • Remote and on-site commissioning assistance (on request) 
  • Troubleshooting support for performance or installation issues 
  • Spare parts planning and lifecycle support guidance 
  • Quick-response technical team for urgent plant requirements 
  • Documentation and training support for maintenance teams 
How does Frigate ensure reliability across critical applications?
  • Strict quality checks at every manufacturing stage 
  • Hydrostatic and dynamic performance testing before dispatch 
  • Proven material selection based on fluid compatibility data 
  • Precision machining and assembly to minimize operational risks 
  • Continuous improvement based on field performance feedback 
Get Clarity with Our Manufacturing Insights
Plug Valve Cost Drivers in Custom Manufacturing for Oil and Gas High Alloy Service Applications 
Procurement teams buying valves for severe-duty lines are not comparing products at a basic level. Commercial...
How Frigate Engineering Solves Your Casting Manufacturing Needs?
By partnering with Frigate, you gain a reliable and experienced partner who can seamlessly integrate...
A Comprehensive Guide to Sizing HVAC Ball Valves for Energy Efficiency
Energy costs from HVAC systems account for nearly 40% of total energy use in commercial buildings. Every...
High-Speed CNC Machining Services with Production – How to Scale Up Fast
Manufacturers today face growing pressure to deliver parts faster without compromising on quality. Industries...
Fire-Resistant Cables – Ensuring Safety, Compliance, and Continuity in Critical Infrastructure
For organizations managing critical infrastructure, fire risk is a matter of safety and operational resilience....
How to Identify CNC Machining Offering With 24/7 Production Support?
Manufacturing timelines are increasingly compressed, design cycles are accelerating, and production expectations...
EI Transformer Designers Guide to Managing Noise and Vibration
EI transformers play a critical role in power distribution, industrial automation, and commercial energy...
Cosmetic Finish Standards in Visible Sheet Metal Components for Premium D2C Consumer Products 
Premium D2C hardware brands operate in a market where product aesthetics directly influence...
How to Compare CNC Machining Suppliers Based on TAT and Quality Assurance
CNC machining is everywhere. It shapes the parts inside cars, airplanes, medical devices, and even the...
Everything Contractors Need to Know About UL 1838 Multi-Tap Lighting Transformers
Modern outdoor lighting systems in commercial and upscale residential spaces demand reliability, safety,...

We'd love to Manufacture for you!

Submit the form below and our representative will be in touch shortly.

LOCATIONS

Registered Office

10-A, First Floor, V.V Complex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, India.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti, Coimbatore-641035, Tamil Nadu, India. ㅤ

Other Locations

  • Bhilai
  • Chennai
  • India
  • Germany
Become a Frigatian
Become a Supplier

GENERAL ENQUIRIES

Linkedin Facebook Instagram Youtube X-twitter
Get Quote
Support All File Formats Including - STEP | STP | SLDPRT | STL | DXF | IPT | X_T | X_B | 3DXML | CATPART | PRT | SAT | 3MF | JT files
  • Let's Connect

LOCATIONS

Registered Office

10-A, First Floor, V.V Complex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, India.

Other Locations

  • Bangalore
  • Chennai
  • India
  • Germany
Become a Frigatian
Become a Supplier

GENERAL ENQUIRIES

  • +91 96778 64606
  • manufacture@frigate.ai
Linkedin Facebook Instagram Youtube X-twitter

Get Your Quote Now

New Get Quote form

Magnetic Drive Pumps

Need reliable wires and cables for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Get Latest Price

Get Price Form

Magnetic Drive Pumps

Need reliable Machining for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Get Latest Price

Get Price Form