Vane Pumps

Inconsistent fluid delivery slows machine cycles and leads to system wear during prolonged operations. Our vane pumps offer 5 to 400 L/min flow with pressure handling up to 180 bar.

Flow Rate Range

5 L/min to 400 L/min (1.3 GPM to 105 GPM) – Variable displacement models available

Pressure/Head Capacity

Up to 180 bar (2,600 psi) – Balanced vane designs for high pressure

Power Requirements

0.5 kW to 75 kW (0.67 HP to 100 HP), 3-phase motors, 50/60 Hz, VFD optional

Materials of Construction

Housing: Cast Iron, Aluminum, Stainless Steel Vanes: Carbon Graphite, PEEK, Composite Cam Ring: Tool Steel, Carbide

Fluid Compatibility

Hydraulic Oils, Lubricants, LPG, Solvents – Avoid abrasive fluids

Product Description

High load setups often face overheating from underpowered drives. This unit accepts 0.5 kW to 75 kW inputs, compatible with VFDs and 3-phase motors across plant standards.

Temperature Range

-20°C to 120°C (-4°F to 248°F) – Higher temps with specialty vanes

Connection Types & Sizes

Flanged (SAE/ANSI), Threaded (BSP/NPT) – Sizes: 12 mm to 50 mm (½” to 2″)

Mounting Configuration

Horizontal or Vertical – Direct-coupled to motors or engines

Seal System

Shaft Seal: Lip Seal, Mechanical Seal, or Magnetic Drive (sealless)

Efficiency Rating

85% to 92% (high volumetric efficiency for low-viscosity fluids)

NPSH Required

0.5 m to 2 m (1.6 ft to 6.5 ft)

Speed Range

600 RPM to 3,600 RPM – Lower speeds for high-viscosity fluids

Solids Handling Capability

max 10µm particles

Certifications & Standards

ISO 4401, NFPA T3.10.7, ATEX

Operating Noise Level

< 65 dB(A) (quieter than gear pumps at similar pressures)

Coupling System

Direct Coupling (Keyed Shaft) or Flexible Coupling

Technical Advantages

Vane pumps often struggle with low inlet pressures, causing vapor lock in high-speed setups. Our vane units need just 0.5 to 2 meters NPSH, reducing cavitation risk.
Abrasive fluid types wear down standard vanes too quickly. These models use PEEK or carbon graphite vanes with carbide cam rings to extend run life.

Let's Get Started

Need reliable Flanges for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Industry Applications

Plastic Injection Molding Machines

Supplies constant hydraulic flow during multi-axis mold movements and high-speed cycles.

Food Processing Fillers

Handles low-viscosity edible oils without foaming or cavitation in fast-fill rotary systems.

Lubrication Skids for CNC Systems

Maintains thin-film oil supply across tight channels under fluctuating load and start-stop cycles.

Textile Dying Lines

Moves heat-sensitive solvents safely at 120°C max without vane fatigue or shaft seal degradation.

Industrial Burner Fuel Feed

Supports direct LPG pumping under ATEX conditions using balanced vane camring assemblies.

Vehicle Transmission Test Benches

Recirculates transmission fluid at controlled pressure for endurance and shock-load tests.

Consistent Output Across Long-Hour Equipment Runs

Systems that run non-stop need flow stability without pressure drops or shaft seal failures. These pumps uses direct or flexible coupling options and handles both vertical and horizontal setups.
Its housing range includes cast iron, aluminum, and stainless steel to match line fluid and ambient temperatures. Lip seal, magnetic drive, or mechanical seals support leak-free runs across plant fluid types.

Having Doubts? Our FAQ

Check all our Frequently Asked Question

Can we define specific flow and pressure settings based on our application?

Yes, we can adjust vane size, cam ring geometry, and displacement to match your required flow and pressure levels. These settings can support both fixed and variable output modes. We validate output through test benches before shipment.

Do you allow selection of materials for aggressive or non-standard fluids?

We offer multiple material options like stainless steel, carbon graphite, and PEEK based on fluid compatibility. You can specify temperature, viscosity, or fluid type during inquiry. We cross-check with prior case runs for matching combinations.

Is it possible to match mounting or coupling with our existing system layout?

We support both horizontal and vertical mounts with options for keyed shaft or flexible couplings. Our team can adjust baseplate hole patterns or shaft dimensions on request. You can share layout drawings for direct matching.

What input do you need before proposing the vane pumps specification?

We typically ask for required flow rate, pressure, fluid type, and motor specs if available. Your installation orientation and line size also help narrow the fit. For repeat orders, we retain configuration details for quicker quoting.

Can the pump support intermittent cycles or low-speed high-torque setups?

Yes, vane geometry and internal clearances can be modified for low-speed or pulsating operations. We also support setups under 900 RPM with reinforced vanes and longer priming stages. Load charts are provided during technical review.

Can Frigate support bulk orders with phased delivery schedules?

Yes, we handle high-volume manufacturing with staggered dispatch planning

Production batches can be aligned with your installation or project timelines

Dedicated planning ensures consistent specs across all batches

We maintain buffer stock for repeat configurations where required

Do you provide pre-dispatch testing and performance validation?

Every unit undergoes flow, pressure, and leak testing before shipment

Test reports are shared with measured performance data

We simulate actual operating conditions wherever applicable

Optional third-party inspection or customer witness testing is supported

Can Frigate integrate the pump with motor and baseplate assemblies?

We supply complete pump-motor skid assemblies ready for installation

Motor selection (IE2/IE3/IE4) is matched to your load and duty cycle

Baseplates are fabricated with alignment and vibration considerations

Fully assembled units reduce on-site integration time and errors

How does Frigate ensure consistency across repeat orders?

We maintain detailed manufacturing records and configuration history

Each order is mapped to a validated BOM and process sheet

Critical tolerances and materials are locked after initial approval

Repeat orders follow the same production and QA benchmarks

What kind of lead time can we expect for customized vane pumps?

Standard configurations – 2–4 weeks depending on quantity

Custom-engineered units – 4–8 weeks based on complexity

Faster turnaround possible for repeat or pre-validated designs

We provide clear production timelines at quotation stage

Get Clarity with Our Manufacturing Insights

From Utility Systems to Rooftop Inverter Transformers - A Complete Configuration Guide

Rooftop solar systems and utility-scale power generation require precise energy conversion to ensure...

Exploring the Full Potential of CNC Machining Capabilities

The Power of CNC Machining – Bringing Ideas to Life CNC machining is a revolutionary manufacturing...

Understanding Core Loss and Efficiency in EI Transformers

Transformer performance is shaped not only by electrical design but also by the magnetic behavior of...

CNC Machining Aerospace Supplier – Choosing the Right Partner for Your Industry

The aerospace industry demands exceptionally high-precision CNC machining aerospace components while...

What to Check Before Sourcing Fire Performance Cables for Oil and Gas Projects

Oil and gas facilities operate under continuous exposure to flammable gases, volatile liquids, high...

Anodizing vs Powder Coating Decision Guide for Visible Sheet Metal Parts in Consumer Electronics

For OEMs handling high-volume Sheet Metal Parts in Consumer Electronics, finishing is directly tied...

How to Identify CNC Machining Offering With 24/7 Production Support?

Manufacturing timelines are increasingly compressed, design cycles are accelerating, and production expectations...

Buy High-Precision CNC Machined Shafts – How to Select the Right Supplier

CNC machined shafts, custom shafts, and precision industrial parts are critical for ensuring machine...

Material Selection in Heavy Gauge Sheet Metal Fabrication for Energy Equipment

Energy infrastructure is expected to work without interruption for decades. Wind towers operate under...

Anodising and Hard Coat Specifications in Aluminium Machined Parts for Aerospace Ground Support

Aerospace ground support equipment manufacturers operate under strict procurement schedules,...

We'd love to Manufacture for you!

Submit the form below and our representative will be in touch shortly.

LOCATIONS

Registered Office

10-A, First Floor, V.V Complex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, India.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti, Coimbatore-641035, Tamil Nadu, India. ㅤ

Other Locations

GENERAL ENQUIRIES

LOCATIONS

Registered Office

10-A, First Floor, V.V Complex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, India.

Components Built for Critical Performance

Engineered Products for Critical Applications

Vane Pumps

Flow Rate Range

Pressure/Head Capacity

Power Requirements

Materials of Construction

Fluid Compatibility

Product Description

Temperature Range

Connection Types & Sizes

Mounting Configuration

Seal System

Efficiency Rating

NPSH Required

Speed Range

Solids Handling Capability

Certifications & Standards

Operating Noise Level

Coupling System

Technical Advantages

Let's Get Started

Industry Applications

Consistent Output Across Long-Hour Equipment Runs

Related products

Diaphragm Pumps

Gear Pumps

Lobe Pumps

Peristaltic Pumps

Piston Pumps

Having Doubts? Our FAQ

Get Clarity with Our Manufacturing Insights

We'd love to Manufacture for you!

LOCATIONS

Registered Office

Operations Office

Other Locations

GENERAL ENQUIRIES

LOCATIONS

Registered Office

Other Locations

GENERAL ENQUIRIES

Get Your Quote Now

Vane Pumps

Get Latest Price

Vane Pumps

Get Latest Price