Magnetic Drive Pumps

Leak-Prone Pumps in Chemical Lines Cause Frequent Shutdowns and Unsafe Working Conditions. Our Magnetic Drive Pumps remove seal failure risks entirely by using a fully enclosed, contact-free drive system.

Flow Rate Range

1 L/min to 500 L/min (0.26 GPM to 132 GPM) – High-capacity models available

Pressure/Head Capacity

Up to 25 bar (362 psi) – Single-stage designs

Power Requirements

0.1 kW to 55 kW (0.13 HP to 75 HP) – 3-phase motors, 50/60 Hz, VFD compatible

Materials of Construction

Casing: PP, PVDF, SS 316, Hastelloy Impeller: Ceramic, SS 316, Carbon Magnet: Samarium Cobalt (SmCo) or Neodymium (NdFeB)

Fluid Compatibility

Corrosives, Volatiles, High-Purity Fluids – Ideal for acids, solvents, and toxic liquids

Product Description

You can benefit from lower fluid loss, zero VOC emissions, and fewer spare parts to stock. These magnetic drive pumps handle corrosive, volatile, and high-purity fluids across continuous-duty operations in chemical, pharma, and semiconductor plants.

Temperature Range

-40°C to 250°C (-40°F to 482°F)

Connection Types & Sizes

Flanged (ANSI/DIN), Threaded (BSP/NPT), Tri-Clamp (Sanitary) – Sizes: 15 mm to 100 mm (½” to 4″)

Mounting Configuration

Horizontal or Vertical – Close-coupled, foot-mounted, or ISO-standard baseplate

Magnetic Coupling Strength

Torque Range: 0.5 Nm to 300 Nm – Temperature-resistant magnets (up to 350°C with cooling)

Efficiency Rating

70% to 85% (lower than mechanical seal pumps due to eddy current losses)

NPSH Required

1.5 m to 5 m (5 ft to 16.4 ft)

Speed Range

1,450 RPM to 2,900 RPM – Lower speeds for viscous fluids

Solids Handling Capability

max 0.1% solids – Not for slurries/abrasives (risk of isolation gap clogging)

Certifications & Standards

ISO 5199, API 685, ATEX, FDA – Compliant for chemical, pharma, and hazardous areas

Operating Noise Level

< 70 dB(A) (quiet operation due to no mechanical contact)

Coupling System

Sealless Magnetic Drive – No physical shaft penetration (zero leakage)

Technical Advantages

Unlike traditional pumps with mechanical seals, our magnetic drive system operates without shaft penetration, preventing emissions and internal contamination. The wide temperature range from -40°C to 250°C supports both cryogenic and hot fluid duties in a single platform.
Eddy current loss is reduced with high-grade Samarium Cobalt magnets, preserving torque even at elevated speeds and ambient heat. Every pump undergoes hydrostatic pressure testing and run-in trials to validate head, flow, and NPSHr values before shipment.

Let's Get Started

Need reliable Flanges for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Industry Applications

Fine Chemical Reactors

PP or PVDF casings resist strong acids while magnetic coupling prevents leak paths near operator zones.

Solvent Transfer Skids

Neodymium drive magnets pflegen torque transfer for low-viscosity solvents with high vapor pressure.

Pharmaceutical Blending Units

Sanitary Tri-Clamp ports and FDA-compliant wetted parts ensure batch purity and clean-in-place compatibility.

Semiconductor Etching Stations

Hastelloy and ceramic internals prevent metal contamination under ultra-high purity demands.

Battery Electrolyte Handling

Sealless design eliminates air contact with reactive liquids like LiPF₆ and HF-based compounds

Hazardous Waste Recovery Systems

ISO 5199 and ATEX ratings meet site safety codes for flammable or toxic fluid recirculation.

Application-Fit Pumping Without Sealing Failures

OEMs and project buyers receive complete configuration control including casing material, impeller type, and magnetic torque rating. We supply VFD-compatible models with ISO baseplate or close-coupled frames to match space and motor preferences.
Each unit includes traceable documentation for API 685 or ATEX Zone 1 compliance when specified. From corrosive loading bays to high-purity filling lines, our pumps reduce fluid loss, safety risks, and long-term service costs.

Having Doubts? Our FAQ

Check all our Frequently Asked Question

Can we specify exact casing and impeller material combinations based on our fluid profile?

Yes, we allow full customization of wetted parts based on the fluid’s chemical resistance needs. Buyers often choose combinations like Hastelloy casing with carbon or ceramic impellers for acid handling. We validate all selections using compatibility charts and past performance data.

Do you offer support for pump sizing based on specific head and flow rate curves?

We size the pump based on your system’s flow and pressure drop values instead of offering fixed models. Each build comes with performance curves, torque load data, and NPSHr mapping. This eliminates mismatch issues during installation or commissioning.

Can we define specific connection types and sizes based on our piping layout?

Yes, we support flanged (ANSI or DIN), threaded (BSP/NPT), and tri-clamp connections from 15 mm to 100 mm. You can match inlet and outlet sizes independently based on your skid or pipeline needs. We also accommodate reducers or adaptors if transition fittings are required.

What if our fluid contains trace solids or has vapor pressure risks?

We assess isolation gap clearance and internal flushing options if solids or degassing risk exists. For trace solids, we limit design to 0.1% and can include optional purge features. We can also build in external cooling jackets for vapor pressure control.

Do you offer different motor-mounting or VFD-ready integration options?

Yes, we support both horizontal and vertical mounting with options like close-coupled or baseplate formats. All motors are VFD-compatible with standard 50/60Hz ratings. This reduces the need for motor reconfiguration or extra drive unit investments.

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

Working with Aluminum Sheet Metal: Tips and Techniques

Many professionals face issues like distortion, cracking, and poor surface finish when working with aluminum...

How Does Plastic Injection Molding Mastery Transform Your Manufacturing Process?

From toy blocks to space shuttle turbine blades, plastic injection molding is a part of our daily life....

How do you Approach Demand Forecasting and Inventory Management in a Volatile Environment?

The business landscape is constantly evolving, but in recent years, the pace of change has become particularly...

Exploring the Full Potential of CNC Machining Capabilities

The Power of CNC Machining – Bringing Ideas to Life CNC machining is a revolutionary manufacturing...

Exploring the Role of Simulation in Advanced Forging Techniques

Are precision, speed, and cost-efficiency achievable simultaneously in forging? This question resonates...

How HDPE Injection Molding Reduces Material Wastage and Boosts Cost Efficiency

Material wastage is a critical issue in manufacturing that silently drains profitability. With rising...

Where to Find CNC Machining Partners That Guarantee On-Time Delivery for Automotive Projects

Are your automotive builds getting delayed because CNC machined parts don’t arrive on schedule? Are you...

Why CNC Machining Material Selection Matters and How to Make the Right Choice

CNC machining material selection is a crucial factor in determining machined components’ performance,...

Benefits of Manufacturing as a Service for Small and Large Businesses

Manufacturing is evolving, but traditional models remain expensive and rigid. High capital expenditures...

Managing Risk in Global Supply Chains with Strategic Manufacturing Partnerships

Managing a global supply chain can feel like juggling many balls at once. With businesses relying on...

Wir freuen uns auf Herstellung für Sie!

Füllen Sie das untenstehende Formular und unser Vertreter wird Sie in Kürze.

LOCATIONS

Sitz

10-A, First Floor, V. V Komplex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, Indien.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti Coimbatore-641035, Tamil Nadu, Indien. ㅤ

Magnetic Drive Pumps

Flow Rate Range

Pressure/Head Capacity

Power Requirements

Materials of Construction

Fluid Compatibility

Product Description

Temperature Range

Connection Types & Sizes

Mounting Configuration

Magnetic Coupling Strength

Efficiency Rating

NPSH Required

Speed Range

Solids Handling Capability

Certifications & Standards

Operating Noise Level

Coupling System

Technical Advantages

Let's Get Started

Industry Applications

Application-Fit Pumping Without Sealing Failures

Ähnliche Produkte

Submersible Sewage Pumps

Sump Pumps

Vacuum Pumps

Barrel Pumps

Coolant Circulation Pumps

Having Doubts? Our FAQ

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

Wir freuen uns auf Herstellung für Sie!

LOCATIONS

Sitz

Operations Office

Weitere Standorte

ALLGEMEINE ANFRAGEN

Funktionen

Unternehmen

Magnetic Drive Pumps

Get Latest Price

Magnetic Drive Pumps

Get Latest Price