Precision Forging Services

Frigate employs advanced precision forging techniques for exceptional dimensional accuracy and material integrity. Our processes minimize waste and enhance mechanical properties for high-quality components. 

Our Clients

Advantages of Precision Forging with Frigate

Superior Mechanical Properties

Precision forging optimizes material flow and alignment, enhancing yield strength and fatigue resistance. This results in components that can withstand extreme loads and conditions.

Enhanced Surface Finish

The forging process imparts a fine surface finish, reducing the need for extensive post-processing. This leads to improved wear resistance and corrosion protection.

Tailored Material Properties

By adjusting forging parameters, engineers can create components with specific mechanical characteristics. This allows for tailored solutions to meet diverse application requirements.

Reduced Heat Treatment Needs

Precision forging often results in favorable microstructures that require minimal or no additional heat treatment, streamlining the production process and reducing energy costs.

Controlling Microstructural Integrity

Microstructural control is crucial in precision forging to achieve the desired mechanical properties. Variability can lead to unwanted phases, weakening strength and toughness. Monitoring factors like temperature, strain rate, and cooling ensures consistent quality. Frigate uses advanced techniques for real-time microstructural analysis, ensuring reliable performance in high-stress applications. 

Get Your Quote Now

1
2
3
4
5
6
7
8
9

Our Precision Forging Process

Material Selection

The appropriate material is chosen based on the required mechanical properties. Steel, aluminum, and titanium are common options. 

Heating

The metal is heated to a specific temperature to achieve the necessary plasticity. This allows for efficient deformation without cracking. 

Die Preparation

Precision dies, which shape the metal, are created with exact specifications. These dies must withstand high forces and temperatures. 

Forging

The heated metal is placed in the die and deformed using a controlled force. This forms the part into its desired shape with high accuracy. 

Cooling

After forging, the component is cooled at a controlled rate. This helps achieve the required microstructure and mechanical properties. 

Finishing and Inspection

The final steps may include heat treatment, surface finishing, and quality inspection. This ensures the part meets dimensional and performance standards. 

Precision Forging Materials

Precision forging utilizes high-quality alloys to enhance component strength and durability. This process minimizes defects, ensuring reliable performance in demanding applications. 

Carbon Steel

Because of its exceptional strength and hardness, it is widely used. Because of its excellent hardness and ductility balance, it is perfect for structural components. The carbon content can be changed to maximise wear resistance and machinability. 

Alloy Steel

Alloy steel contains chromium, molybdenum, and nickel, enhancing its hardness, corrosion resistance, and fatigue strength. It's commonly used in demanding applications such as automotive and aerospace components that require high durability. 

Stainless Steel

Due to its chromium content, stainless steel offers superior corrosion resistance. It also maintains strength at high temperatures, making it suitable for precision forging in environments where corrosion and heat resistance are critical, like medical devices and chemical industries. 

Aluminum Alloys

Aluminum alloys are favored for their lightweight and high strength-to-weight ratio. They are used in the aerospace, automotive, and electronics industries. These alloys also offer excellent corrosion resistance and conductivity. 

Titanium Alloys

Titanium alloys combine high strength, low density, and excellent corrosion resistance. They are particularly suited for high-performance aerospace, marine, and medical applications. Titanium's high melting point and biocompatibility make it ideal for critical components. 

Copper and Brass Alloys

Copper and brass alloys are chosen for their excellent electrical conductivity and corrosion resistance. They are often used in precision forging for electrical connectors, heat exchangers, and plumbing components. Copper alloys also exhibit good thermal conductivity, making them ideal for heat transfer applications. 

Nickel-Based Alloys

Nickel-based alloys are known for their resistance to high temperatures and extreme environments. They are used in precision forging for turbine blades, aircraft parts, and chemical processing equipment where both corrosion resistance and high-temperature performance are crucial. 

Precision Forging for Optimal Performance

Custom precision forging delivers tailored, high-strength components with tight tolerances. Controlled processes ensure material integrity and accuracy. It reduces waste and post-processing, providing reliable parts for demanding environments. Each component improves performance across various industries. 

Compliance for Precision Forging Services

Frigate ensures that each component adheres to the most demanding industry standards. Our advanced forging processes integrate strict quality control and testing protocols, enabling us to meet precise mechanical properties, dimensional accuracy, and material integrity requirements. It ensures that our products perform reliably in high-stress, critical applications, with a focus on safety and long-term durability. 

ISO 9001:2015 (Certification No. 12345)

This standard focuses on robust quality management systems, ensuring precise documentation, traceability, and control of forging operations. 

ISO 14001:2015 (Certification No. 67890)

Implements environmental risk management strategies, optimizes energy consumption, and minimizes waste during forging production. 

AS9100D (Certification No. 11223)

Aerospace-specific standard, ensuring that every forging meets exacting specifications for high-performance materials and processes critical to aviation. 

API 6A (Certification No. 44556)

Guarantees that oil and gas equipment forgings meet rigorous pressure, stress, and fatigue resistance requirements under extreme conditions. 

RoHS Compliance (Certification No. 78901)

This ensures that materials used in forging are free from hazardous substances, meeting strict European directives on safety and environmental health. 

ASTM A182 (Certification No. 33445)

Specifies material properties for high-alloy, heat-resistant steels, ensuring optimal mechanical performance and integrity under high temperatures and pressures. 

 

Tolerance for Precision Forging Services

Forging Grain Flow
±0.02 mm

Deviation in the direction of grain flow, ensuring optimal mechanical properties such as strength and fatigue resistance in critical load-bearing areas. 

True Position
±0.002" to ±0.010"

Tolerance on the location of holes or features relative to a datum, essential for precise assembly and functionality in high-performance applications. 

Angular Tolerance
±0.5° to ±2.0°

Deviation in angle accuracy, important for parts requiring tight angular alignment for mechanical function or assembly. 

Concentricity
±0.001" to ±0.005"

Deviation in the central alignment of circular features, ensuring precise rotational symmetry and balance, especially for components like shafts or bearings. 

Profile Tolerance
±0.003" to ±0.010"

Deviation from the specified profile, ensuring that complex geometries meet exact specifications for proper fit and functionality. 

Radial Runout
±0.002" to ±0.005"

Deviation of a rotating part’s outer surface from its central axis, critical for high-precision rotating components such as gears or flywheels. 

Linear Runout
±0.003" to ±0.010"

Deviation of a part’s surface in the direction of motion, affecting parts like shafts or spindles where high rotational accuracy is required. 

Material Hardness Variation
±5 to ±10 HRC

Variability in hardness across the forged part, critical for maintaining consistent wear resistance and mechanical performance. 

Sectional Thickness Variation
±0.001" to ±0.010"

Variation in material thickness in different sections of the forged part, important for stress distribution and mechanical properties in load-bearing areas. 

Corner Radius
±0.005" to ±0.020"

Tolerance on radii at part corners, ensuring smooth transitions and reducing stress concentrations, vital for high-strength parts exposed to fatigue. 

Surface Roughness (Micro-Texture)
Ra 0.1 to Ra 3.2

Tolerance on micro-texture or surface finish in critical functional areas, ensuring minimal friction and optimal wear resistance, particularly in sealing or mating surfaces. 

Dimensional Uniformity
±0.005" to ±0.015"

Consistency across the entire batch, ensuring that all parts within a production lot meet the same dimensional specifications for interchangeable performance. 

Ovality
±0.002" to ±0.010"

Deviation from a true circular shape in cylindrical features like shafts, affecting rotational accuracy and load distribution in high-speed applications. 

Metallurgical Consistency
≤ 1% variation in alloy composition

Variability in alloy composition across the forged part, ensuring uniform mechanical properties and preventing weak spots or failure under stress. 

Thermal Distortion
±0.01" to ±0.050"

Deviation caused by temperature fluctuations during cooling, particularly in high-stress applications where dimensional stability is crucial. 

Quality Testing Standards for Precision Forging Services

Forgeability Index
Forgeability Test (ASTM E1012)

Assesses the ease with which a material can be processed during forging, considering factors like ductility and flow stress to optimize production. 

Wear Resistance
Pin-on-Disk Testing (ASTM G99)

Measures the material's resistance to wear under simulated frictional forces, ensuring durability in high-wear environments. 

Recrystallization Behavior
Differential Thermal Analysis (DTA)

Analyzes the temperature at which the material's microstructure undergoes recrystallization, impacting final hardness and grain structure. 

Hydrogen Embrittlement
Hydrogen Content Testing (ASTM E1447)

Determines the presence of hydrogen in the material, which can lead to cracking or embrittlement, especially in high-strength alloys. 

Phase Transformation
Differential Scanning Calorimetry (DSC)

Measures phase transitions in alloys during heating or cooling, ensuring that the material maintains optimal properties under service conditions. 

Internal Stress Distribution
Neutron Diffraction Testing

Maps internal stresses within the material, ensuring uniform stress distribution for optimal performance and minimal risk of failure. 

High-Temperature Performance
High-Temperature Tensile Testing (ASTM E21)

Evaluates the material's mechanical properties at elevated temperatures, critical for forging parts exposed to extreme thermal conditions. 

Bonding Strength
Shear Test (ASTM B769)

Measures the strength of bonded interfaces in forged components, particularly for materials that undergo joining during the forging process. 

Chemical Corrosion Resistance
Potentiodynamic Polarization Testing

Assesses the material’s resistance to electrochemical corrosion, crucial for parts exposed to aggressive chemical environments, such as in the aerospace or automotive industries. 

Stress Corrosion Cracking
Slow Strain Rate Testing (ASTM G129)

Evaluates the susceptibility of forged materials to stress corrosion cracking under tensile stress in corrosive environments. 

Crafting Tomorrow's Aerospace Components

Aerospace components demand exceptional strength, precision, and reliability. Meeting these challenges can be difficult. Precision forging solves these issues by providing high-strength parts with exact tolerances and minimal defects. This process enhances material properties, ensuring components endure extreme stresses and temperatures. It is a cost-effective solution without sacrificing quality. 

Industries We Serve

What You Get

↓ 7-8%

OPS COST

↓ 2-3%

COGM

3X

Aggregation

↑ 25%

Machinery Utilisation

↓ 50%

Expedition

↑ 30%

Frigater Revenue

Overcoming Heat Treatment Challenges in Forged Materials

Heat treatment compatibility is vital for forged materials. Not all alloys react well to standard processes, which can cause brittleness and reduced ductility, compromising performance. Understanding each material’s heat treatment needs is crucial. Frigate employs materials expertise to optimize heating and cooling cycles. Tailored protocols ensure components achieve maximum mechanical potential and reliability in high-performance applications. 

Check Out Our Blogs

What Our Customers Say about Frigate

21%

Faster Manufacturing

Having Doubts? Our FAQ

Check all our Frequently Asked Question

How does precision forging enhance material strength?

Precision forging applies controlled force and temperature to shape metals. This process aligns the grain structure, improving the strength and toughness of the final component. 

What factors influence the choice of material for precision forging?

Material selection depends on the required mechanical properties, temperature, and corrosion resistance. Specific alloys may be chosen based on their performance in high-stress environments. 

How does the die design affect the precision forging process?

The die design is crucial for achieving dimensional accuracy. Precise contours and features in the die ensure that the forged component meets tight tolerances and reduces machining requirements. 

What role does temperature play in the precision forging process?

Temperature affects the material's plasticity during forging. Proper heating allows for easier deformation, while cooling rates post-forging can influence the material's final microstructure and properties. 

How is quality control maintained throughout the precision forging process?

Quality control is achieved through in-process inspections, material testing, and final component evaluations. Techniques such as non-destructive testing and dimensional measurements ensure that parts meet specifications. 

We'd love to Manufacture for you!

Submit the form below and our representative will be in touch shortly.

LOCATIONS

Global Sales Office

818, Preakness lane, Coppell, Texas, USA – 75019

Registered Office

23, 6th West Street, Balaji Nagar, Kattur,  Pappakuruchi, Tiruchirappalli-620019, Tamil Nadu, India.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti, Coimbatore-641035, Tamil Nadu, India. ã…¤

GENERAL ENQUIRIES

Click or drag files to this area to upload. You can upload up to 10 files.
Support All File Formats Including - STEP | STP | SLDPRT | STL | DXF | IPT | X_T | X_B | 3DXML | CATPART | PRT | SAT | 3MF | JT files

Loading....