Rubber Edge Seal – Automotive Grade

The Rubber Edge Seal is made from elastomers that offer excellent resistance to extreme temperatures, UV radiation, and ozone. These materials pflegen their flexibility and integrity from -40°C to 120°C, ensuring reliable performance in a wide range of climates. This durability helps prevent seal failure from environmental factors, ensuring long-lasting protection.

Materialien

High-performance elastomer compounds (EPDM, TPE, NBR) ensuring durability, flexibility, and chemical resistance.

Surface Finishes

Available in smooth, matte, or textured finishes, offering varied aesthetics and functional performance.

Compliance Standards

Conforms to ISO 9001, ISO 14001, IATF 16949, ensuring quality, environmental, and automotive industry standards.

Cross-Section Area (A)

5 – 30 mm², depending on the seal profile and application requirements for optimal sealing efficiency.

Mass per Meter (m)

0.05 – 0.25 kg/m, depending on material density and the specific profile design chosen.

Product Description

Designed with tight tolerances, the Rubber Edge Seal ensures an exact fit for various automotive components, minimizing gaps and ensuring an effective seal. It retains its shape and mechanical properties under compression, providing consistent sealing force and enhancing water, air, and noise resistance over time.

Moment of Inertia (Ix / Iy)

X-axis: 1.2–3.5×10⁻⁶ m⁴ (profile shape); Y-axis: 1.0–3.0×10⁻⁶ m⁴ (bending stress).

Section Modulus (Zx / Zy)

2.1 x 10^-4 – 8.5 x 10^-4 m³, affecting strength and resistance to bending moments in dynamic applications.

Radius of Gyration (ix / iy)

0.03 – 0.12 m, representing the seal’s resistance to bending under applied forces in various directions.

Max. Axial Load (Euler Buckling)

100 – 400 N, defining the axial load capacity before structural buckling occurs under pressure.

Max. Load at Slot (Shear Test)

150 – 500 N, determining the shear strength of the seal at the slot interface under load.

Torsional Constant (J)

1.4 x 10^-6 – 3.8 x 10^-6 m⁴, providing torsional rigidity and resistance to twisting under torque.

Max Torque (Torsional Load Limit)

2.5 – 8.0 Nm, defining the maximum torque the seal can withstand without experiencing deformation.

Elastic Deflection (100 N Load)

1.5 – 5.0 mm, indicating the seal’s ability to elastically deform under specified loads without permanent damage.

Dynamic Load Rating

500 – 2000 N, specifying the seal’s capacity to resist fatigue and wear under dynamic conditions.

Compatibility Tolerance

±0.5 mm, ensuring precise fit with mating surfaces for optimal sealing and functional integrity.

Machining Precision Grade

±0.1 mm tolerance, ensuring high precision for custom cuts and accurate fit in assemblies.

Fatigue Life (Slot Edge)

100,000 – 500,000 cycles, measuring durability and endurance against repeated mechanical stresses over time.

Thermal Expansion (ΔL @ ΔT=50°C)

0.0001 – 0.0003 mm/°C, determining dimensional stability of the seal under varying temperature conditions.

Slot Pull-Out Resistance

30 – 80 N, indicating the force required to pull the seal out of its designated slot.

Max Load Bearing at Corner Joint

150 – 600 N, indicating the seal’s load-bearing capacity at corner joints, ensuring durability.

Technical Advantages

The seal is engineered to reduce noise and vibration by absorbing mechanical impacts between mating surfaces. Its viscoelastic properties help dissipate energy, reducing road noise, wind noise, and vibrations, contributing to a quieter, more comfortable cabin environment.

The Rubber Edge Seal resists exposure to automotive chemicals like oils, fuels, and coolant fluids. This resistance prevents degradation and ensures the seal maintains its performance, even in contact with harsh substances, reducing the risk of failure and maintaining reliability.

Let's Get Started

Need reliable Extrusion for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Industry Applications

Door Seals

Provides a tight seal around doors to prevent water, dust, and noise infiltration, ensuring passenger comfort and protection.

Window Seals

Ensures a durable barrier against air and water leaks around automotive windows, maintaining structural integrity and insulation.

Trunk Seals

Prevents moisture and contaminants from entering the trunk area, protecting sensitive cargo and preventing rust formation on metal parts.

Hood Seals

Seals engine compartments to prevent dirt, moisture, and debris entry, safeguarding engine components and ensuring long-term performance.

Sunroof Seals

Designed to withstand UV exposure and extreme temperatures, providing a secure seal against water ingress and reducing noise.

Wheel Well Seals

Protects the wheel arches from dirt, road debris, and water ingress, preventing corrosion and preserving vehicle longevity.

Long-Term Performance and Reduced Maintenance

Engineered for longevity, the Rubber Edge Seal withstands wear from environmental exposure, mechanical stress, and chemicals. Its resistance to compression set ensures it maintains sealing effectiveness over time, reducing maintenance needs and operational downtime.

The Rubber Edge Seal can be tailored to meet the unique requirements of different automotive applications. Whether for high-temperature engine components or noise-dampening seals, custom formulations ensure optimal performance for each specific use.

Having Doubts? Our FAQ

Check all our Frequently Asked Question

How does Frigate’s Rubber Edge Seal withstand repeated compression and ensure long-term sealing performance?

Frigate’s Rubber Edge Seal is made from advanced elastomer compounds that offer high resistance to compression set. The materials pflegen their sealing force even after repeated compression, preventing seal degradation over time. This ensures a consistent barrier against contaminants and environmental elements for extended periods.

What makes Frigate’s Rubber Edge Seal resistant to environmental stressors like ozone and UV radiation?

Frigate’s Rubber Edge Seal is formulated with UV stabilizers and ozone-resistant compounds to protect the seal from environmental degradation. These additives prevent cracking, hardening, and loss of elasticity when exposed to sunlight or ozone. This enhances the seal’s durability, ensuring long-term reliability in outdoor automotive applications.

How does Frigate’s Rubber Edge Seal ensure optimal performance in high-temperature automotive environments?

Frigate’s Rubber Edge Seal uses heat-resistant elastomers capable of withstanding temperatures ranging from -40°C to 120°C. These compounds retain their flexibility and sealing ability even in extreme temperatures, preventing failure in engine compartments or other high-heat areas. This ensures continuous protection for automotive systems operating in hot environments.

What measures does Frigate take to ensure the Rubber Edge Seal's resistance to automotive fluids like oils and coolants?

Frigate’s Rubber Edge Seal is constructed from materials engineered for superior chemical resistance. It prevents degradation when exposed to oils, coolants, and other automotive fluids, maintaining its shape and sealing properties. This resistance is crucial for preventing seal failure in parts exposed to such substances during vehicle operation.

How does Frigate’s Rubber Edge Seal contribute to noise reduction in automotive applications?

Frigate’s Rubber Edge Seal incorporates viscoelastic materials that absorb vibrations and reduce noise transmission. The seal dampens mechanical impacts between mating parts, mitigating noise from road surfaces, engine vibrations, and wind. This helps create a quieter, more comfortable driving experience by minimizing sound and vibration transfer.

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

The Art and Science of Brass Metal Casting

Have you ever wondered why your brass components sometimes have defects like cracks or surface imperfections?...

How to Build and Lead Supply Chain Teams to Achieve Optimal Performance and Meet Strategic Goals?

How Supply Chain Teams Drive Strategic Success The world of business runs on a complex network – the...

Best CNC Machining Partners for Large-Scale Manufacturing - Price and Capacity Guide

Precision manufacturing demands accuracy, repeatability, and efficiency—especially when production scales...

How to Reduce Time-to-Market with Agile Manufacturing and Value Engineering

Bringing new products to market today is like racing against time, fast, unforgiving, and packed with...

How Precision Forging Improves Performance in Critical Applications

Do you ever wonder how parts used in airplanes, medical devices, or energy turbines can withstand extreme...

Reducing Installation Time and Cost with Pre-Terminated Cable Solutions

Why do enterprises still face challenges with cable installations despite advancements in technology?...

The Importance of Supplier Collaboration in Achieving Manufacturing Excellence

Have you ever faced delays, quality issues, or unexpected costs because of supplier problems? For many...

How to Extend the Lifespan of Industrial Cables - Maintenance and Best Practices?

Every CEO and operations head knows that a single overlooked component can halt operations, disrupt revenue...

Understanding Hot Forging and Its Industrial Applications

Hot forging is a crucial process in the manufacturing industry, especially when producing high-strength...

Top Metal Stamping Components Available in Michigan

Are you facing challenges in sourcing metal stamping components that meet exact specifications while...

Wir freuen uns auf Herstellung für Sie!

Füllen Sie das untenstehende Formular und unser Vertreter wird Sie in Kürze.

LOCATIONS

Sitz

10-A, First Floor, V. V Komplex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, Indien.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti Coimbatore-641035, Tamil Nadu, Indien. ㅤ

Rubber Edge Seal – Automotive Grade

Materialien

Surface Finishes

Compliance Standards

Cross-Section Area (A)

Mass per Meter (m)

Product Description

Moment of Inertia (Ix / Iy)

Section Modulus (Zx / Zy)

Radius of Gyration (ix / iy)

Max. Axial Load (Euler Buckling)

Max. Load at Slot (Shear Test)

Torsional Constant (J)

Max Torque (Torsional Load Limit)

Elastic Deflection (100 N Load)

Dynamic Load Rating

Compatibility Tolerance

Machining Precision Grade

Fatigue Life (Slot Edge)

Thermal Expansion (ΔL @ ΔT=50°C)

Slot Pull-Out Resistance

Max Load Bearing at Corner Joint

Technical Advantages

Let's Get Started

Industry Applications

Long-Term Performance and Reduced Maintenance

Ähnliche Produkte

Automotive Door Trim Seal (Co-Extruded)

Rubber Bumper Protector (Extruded)

Bus Body Side Panel Extrusions (Aluminum/FRP)

Having Doubts? Our FAQ

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

Wir freuen uns auf Herstellung für Sie!

LOCATIONS

Sitz

Operations Office

Weitere Standorte

ALLGEMEINE ANFRAGEN

Funktionen

Unternehmen

Rubber Edge Seal – Automotive Grade

Get Latest Price

Rubber Edge Seal – Automotive Grade

Get Latest Price