“Landing Gear Trunnion Pins” has been added to your cart. View cart

Hydraulic Actuation Blocks

Name: Hydraulic Manifold Blocks & Precision Fluid Routing Units – Frigate
Price: 249.00 USD
Availability: InStock

Hydraulic Actuation Blocks systems with multiple discrete valves often face challenges like excessive connection points, pressure loss, and signal delays. A unified actuation block architecture addresses these issues by integrating directional, pressure relief, check, and flow control valves into a single compact housing.

Material Specification

Aluminum 7075-T7351 (AMS 4050), Titanium 6Al-4V (AMS 4928), or Stainless Steel 17-4PH (AMS 5643)

Pressure Rating

3,000–8,000 psi (Standard), 10,000 psi (High-Pressure), Burst Pressure ≥1.5x Operating

Port Configuration

4–12 Ports (SAE J1926/ISO 6149), ORFS (J1926), MS/MIL Spec Threads

Integrated Cavities

Spool Valve Bores (Ø6–25mm, H7 Tolerance), Check Valve Seats, Pressure Relief Channels

Flow Path Design

CFD-Optimized Manifold, Laminar Flow Channels (Ra 0.8µm), Min. 90° Bends Avoided

Product Description

This design reduces inter-component distances, allowing efficient high-pressure routing with minimal resistance and optimized laminar flow. Fewer joints and fittings also lower leakage risks and assembly time—an advantage in high-density motion control setups where space and reliability are critical.

Fluid Compatibility

Skydrol LD-4, MIL-H-5606, HyJet V, Phosphate Esters

Temperature Range

-65°F to +275°F (Standard), -100°F to +400°F (Extreme)

Seal Interfaces

O-Ring Grooves (AS568), Metal-to-Metal (Conical Seat), PTFE Backup Rings

Dimensional Tolerances

Port Alignment – ±0.05mm, Bore Straightness – ≤0.01mm/100mm, Flatness – ≤0.02mm

Leakage Rate

Internal – ≤0.1 cc/min @ 1.1x Operating Pressure, External – Zero Leakage (MIL-STD-1522A)

Technical Advantages

Variability in hydraulic signal propagation, especially in complex or multi-axis systems, leads to inconsistent actuation profiles. Channel lengths, internal surface finish, and turbulence reduction features are engineered to ensure uniform pressure delivery to each actuator. Circuit topology within the block is optimized using CFD-based modeling to maintain signal timing consistency across parallel functions. This configuration allows for tightly synchronized actuator motion, eliminating phase shift during high-frequency operation or rapid load transitions.

Hydraulic actuation systems subjected to load-induced shocks or directional reversals frequently experience internal pressure surges that can degrade valve life or affect positional accuracy. Strategic placement of damping chambers, accumulator ports, and pressure snubbing geometries within the block attenuates transient spikes. These passive pressure regulation features reduce fluid hammer effects and support smooth deceleration and reacceleration cycles under load. The result is a mechanically quieter and dynamically more stable system behavior.

Let's Get Started

Need reliable Machining for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Industry Applications

Aerospace Flight Control Systems

Manages synchronized actuation of ailerons, flaps, and rudders using compact, pressure-balanced hydraulic valve integration for weight-sensitive platforms.

Mobile Construction Equipment

Controls multi-function cylinders in excavators and loaders by consolidating flow paths and directional valves for reduced response time and leakage points.

Subsea ROV and BOP Systems

Directs hydraulic functions in remotely operated vehicles and blowout preventers under high-pressure, saltwater conditions using corrosion-resistant manifold designs.

Defense and Military Platforms

Regulates actuation of armored hatch systems, missile doors, and recoil dampers with shock-isolated, fail-safe hydraulic circuit configurations.

Industrial Injection Molding Machines

Operates mold open-close and ejector functions by managing high-speed directional valve flow paths with low hysteresis and high repeatability.

Wind Turbine Pitch Control Systems

Controls blade pitch adjustments via closed-loop hydraulic feedback using temperature-stable channels and embedded sensor ports for condition monitoring.

Thermal Load Compensation and Drift Resistance

Thermal gradients in high-duty-cycle or environmentally exposed applications cause volumetric expansion, fluid viscosity changes, and seal relaxation—all of which impact actuator repeatability. The hydraulic actuation blocks employs symmetric channel layouts and material selections with closely matched thermal expansion coefficients. Critical regions incorporate thermal break geometries to isolate heat zones, while internal bypass routing facilitates fluid circulation to prevent localized overheating. These features contribute to thermal equilibrium, ensuring consistent pressure characteristics throughout operation.

Hydraulic diagnostics are critical for condition-based maintenance and closed-loop control. Ports for pressure transducers, temperature sensors, and flow monitors are embedded directly into the block during machining, avoiding aftermarket modifications or system disassembly. Fluid routing paths are designed with sensor accessibility in mind, offering precise correlation between control signal and system state. This integration enables real-time health monitoring, actuator feedback, and system state validation without disrupting the hydraulic envelope.

Having Doubts? Our FAQ

Check all our Frequently Asked Question

How does Frigate ensure dimensional accuracy in complex multi-valve hydraulic actuation blocks?

Frigate uses multi-axis CNC machining with single-setup operations to maintain tight geometric tolerances across all valve interfaces. This reduces cumulative tolerance stack-up, which is critical for high-pressure sealing and valve alignment. Cavity positions and surface flatness are maintained within ±5 microns. This ensures consistent hydraulic performance during dynamic loading.

What materials does Frigate use for hydraulic actuation blocks operating in corrosive or high-vibration environments?

Frigate selects high-strength alloy steels and anodized aluminum alloys based on mechanical stress and environmental exposure levels. For subsea or chemical environments, hydraulic actuation blocks are treated with electroless nickel plating or ceramic coatings for corrosion protection. All material choices are validated through pressure cycling and salt spray testing. This extends service life without compromising mechanical stiffness or fatigue strength.

How does Frigate handle thermal expansion issues in high-duty-cycle hydraulic systems?

Frigate designs the block layout using symmetric flow paths and selects materials with closely matched thermal expansion coefficients. Internal compensating chambers are used to absorb fluid volume changes without stressing seals or valve alignment. This eliminates pressure drift and maintains response consistency under thermal load. All designs undergo thermal soak and cycling validation.

Can Frigate integrate custom sensor ports and diagnostic features into the block design?

Yes, Frigate offers integrated sensor ports for pressure, temperature, and flow at precise measurement zones inside the hydraulic circuit. These features are machined during primary manufacturing to avoid secondary modifications. Port geometry and placement follow ISO and SAE standards for sensor compatibility. This enables easy integration with predictive maintenance and control systems.

How does Frigate prevent internal leakage or circuit interference in high-density hydraulic actuation blocks?

Frigate uses isolated valve cavities and independent return paths to prevent cross-talk between adjacent hydraulic functions. Flow separation is validated using fluid simulation and real-world impulse testing. Seal lands and cavity interfaces are precision-machined to eliminate internal bypass leakage. This ensures each control function operates independently and predictably, even in compact layouts.

Get Clarity with Our Manufacturing Insights

How 10 Most Common Power Problems solved by Toroidal Transformers Installation

Power systems today are built with increasing demands for efficiency, compact design, minimal noise,...

Where to Get CNC Machining Services for Medical Components with Certified Cleanroom Capabilities

Medical device manufacturers face increasing pressure to deliver precision parts that meet strict hygiene,...

CNC Machining Services Cost Guide - How to Find the Best Price for Quality Results

CNC machining services companies often face a common dilemma: How can they get quality results without...

How to Overcome Material Sourcing Challenges in Aerospace CNC Manufacturing

Aerospace CNC Manufacturing demands unmatched precision, long-term reliability, and strict compliance...

How Cutting Tool Selection Impacts Your CNC Part’s Lifespan

Cutting tool selection is a foundational factor that directly impacts the service life and performance...

Buy CNC Titanium Machining Parts for Healthcare Applications – High-Precision Manufacturing

Titanium has become an indispensable material in modern healthcare, revolutionizing the manufacturing...

Why Upset Forging Offers Unique Benefits?

When you’re in manufacturing, precision and strength are non-negotiable. Whether you’re producing...

Manufacturing as a Service Explained and Why It Is the Future

Modern manufacturing demands high efficiency, flexibility, and cost optimization, yet traditional manufacturing...

Achieve Tight Tolerances with Advanced CNC Machining

A standard tolerance level of +/- 0.0050 in advanced CNC machining is enough for most components/parts....

Speed Up Your Production with Rapid CNC Machining Services

Rapid CNC machining is an innovative concept revolutionizing the manufacturing industry. It was initially...

We'd love to Manufacture for you!

Submit the form below and our representative will be in touch shortly.

LOCATIONS

Registered Office

10-A, First Floor, V.V Complex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, India.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti, Coimbatore-641035, Tamil Nadu, India. ㅤ

Other Locations

GENERAL ENQUIRIES

FRIGATE is a B2B manufacturing company that facilitates New Product Development, contract manufacturing, parallel manufacturing, and more, leveraging its extensive partner networks.

Automotive OEM & Aftermarket

Aerospace & Defense

Electronics Manufacturing

Robotics & Automation Systems

Consumer Electronics

Medical Devices

Renewable Energy

Oil & Gas Equipment

Marine & Shipbuilding