Engine Oil Filter Adapters

Name: Engine Oil Filter Adapters | Oil Routing & Filter Mounts - Frigate
Price: 249.00 USD
Availability: InStock

Engine oil filter adapters are designed to endure cyclical thermal expansion, constant vibration, and long-term exposure to aggressive lubricants. To meet these demands, advanced adapters are manufactured from high-strength, precision-cast aluminum alloys or engineered composites with a controlled microstructure that resists fatigue cracking and corrosion.

Material Specification

Billet Aluminum (6061-T6), Cast Iron (DIN 1691), or Stainless Steel (AISI 304)

Engine Block Mounting Interface

SAE J518 Code 61/62 (4-bolt flange), OEM-specific bolt pattern, or NPT threaded (1/2”–1”)

Oil Filter Mounting Interface

Spin-on (M20x1.5, 3/4”-16 UNF), Remote-mount (AN-10/12), or Cartridge-style (O-ring sealed)

Dimensional Tolerances

±0.05mm (Bore alignment), ±0.1mm (Flange flatness)

Oil Port Configuration

Dual-port (Bypass/feed), Thermostat-integrated, or Turbo feed line (1/8” NPT)

Product Description

To further improve durability, surface treatments like hard anodizing or chemical passivation are applied. These coatings enhance resistance to pitting and galvanic corrosion, ensuring dimensional stability and dependable performance under high-temperature, high-pressure operating conditions.

Pressure Rating

10–100 psi (Standard), 150 psi (High-performance), 300 psi (Race)

Seal Material & Type

Viton O-rings (High-temp), PTFE gaskets, or Copper crush washers

Internal Flow Path Design

Straight-through (Low restriction), Bypass valve (15–25 psi), or Coolant-integrated (Oil cooler ports)

Corrosion Resistance/Coating

Hard Anodized (Aluminum), Nickel-plated (Steel), or Ceramic-coated (High-temp)

Certification Standards

ISO 4548 (Filter tests), SAE J20 (Fluid seals), ASME B16.5 (Flanges)

Technical Advantages

Internal geometries are engineered using computational fluid dynamics (CFD) to optimize oil flow paths, reducing turbulence and minimizing pressure drop across the adapter body. Flow-optimized channels and radiused transitions help maintain laminar flow, supporting rapid oil delivery to critical engine bearings and hydraulic lifters. This approach ensures consistent lubrication even during transient load conditions, safeguarding against localized starvation and thermal hotspots.

Adapter-to-block and filter-to-adapter interfaces are designed with precision-machined sealing lands and integrated O-ring grooves, accommodating high-durometer elastomers that retain elasticity under thermal cycling. Finite element analysis (FEA) validates stress distribution across sealing surfaces, reducing the risk of microleakage and gasket extrusion. This robust sealing strategy supports long service intervals and reduces the likelihood of oil seepage in both static and dynahttps://frigate.ai/supplychain/why-predictive-maintenance-is-the-key-to-reducing-equipment-downtime/mic operating conditions.

Let's Get Started

Need reliable Machining for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Industry Applications

Automotive internal combustion engines

Provides a secure interface for oil filtration and cooling, supporting high-volume production and tight dimensional tolerances required by OEMs.

Heavy-duty industrial machinery

Enables robust oil filtration in generators, compressors, and hydraulic systems, supporting extended service intervals and high contaminant loads.

Marine propulsion systems

Facilitates corrosion-resistant oil filtration and thermal management in marine engines operating under variable load and saltwater exposure.

Aerospace piston engines

Integrates with aircraft engine lubrication systems, allowing for high-efficiency filtration and sensor compatibility in aviation environments.

Power generation equipment

Supports filtration and cooling in stationary and mobile generators, ensuring oil cleanliness for reliable, long-duration operation.

Agricultural equipment

Provides modular filtration solutions for tractors and harvesters, accommodating high particulate loads and field-serviceable maintenance requirements.

Sensor Integration and Diagnostic Compatibility

Modern adapters incorporate standardized ports for pressure and temperature sensors, machined to tight tolerances to ensure leak-free sensor installation and accurate signal acquisition. Provisions for redundant sensor mounting and shielded wiring channels enable integration with advanced engine management systems, facilitating real-time diagnostic monitoring and predictive maintenance.

Engine Oil Filter Adapters bodies are designed with integrated heat sinks or extended surface features, enhancing convective heat transfer away from the oil stream. Material selection and wall thickness optimization contribute to effective thermal conduction, preventing oil degradation and maintaining viscosity stability during extended high-load operation.

Having Doubts? Our FAQ

Check all our Frequently Asked Question

How does adapter material selection affect thermal expansion and long-term sealing performance for Frigate applications?

Selecting an adapter material with a low coefficient of thermal expansion is critical for Frigate engines, as it maintains consistent gasket compression under wide temperature fluctuations and high vibration, preventing oil leaks and ensuring reliable sealing over extended operational cycles.

What impact does internal flow path geometry have on oil pressure and filtration efficiency in Frigate engine systems?

Optimized internal channel geometry in Frigate oil filter adapters reduces turbulence and minimizes pressure drop, guaranteeing stable oil pressure and efficient contaminant removal at varying engine speeds and loads, which is essential for mission-critical reliability.

How does the adapter interface accommodate pressure and temperature sensor integration for real-time diagnostics in Frigate platforms?

Precision-machined sensor ports on Frigate engine oil filter adapters, with standardized threads and sealing surfaces, enable secure and leak-free installation of pressure and temperature sensors, supporting accurate, real-time data acquisition for advanced engine health monitoring and predictive maintenance.

Why is anti-drain-back valve compatibility critical for preventing oil starvation at Frigate engine startup?

Engine Oil Filter Adapters compatible with anti-drain-back valves retain oil within the filter assembly of Frigate engines, ensuring immediate lubrication upon startup and significantly reducing wear during cold starts or after prolonged shutdowns in demanding marine environments.

What are the torque requirements for adapter installation to avoid deformation or improper sealing in Frigate applications?

Specified torque values for Frigate engine oil filter adapters ensure uniform gasket compression, preventing housing deformation and minimizing the risk of oil leaks under dynamic engine loads, thereby supporting operational safety and long-term component integrity.

Get Clarity with Our Manufacturing Insights

Where to Source CNC Machining Services for Oilfield Tools That Handle Exotic Alloys

Machining Services for Oilfield Tools must account for extreme conditions, exotic materials, and dimensional...

Balancing Cost and Quality - Best Practices for Choosing a Contract Manufacturing Partner

Have you ever struggled to find a manufacturing partner who can keep costs low while maintaining high-quality...

Affordable CNC Machining for High-Quality Results at Competitive Prices

How can high-quality parts be created while keeping costs down? This challenge is especially pressing...

Where to Source Complex CNC Machining for Composite Material Parts

Composite materials have become essential across high-performance industries. Advanced sectors such as...

Top Trends in Aluminum Die Casting for 2025

Are you facing the challenge of balancing production efficiency, cost reduction, and quality control...

Leveraging Frigate’s Advanced Casting Services for Competitive Advantage

In manufacturing, companies constantly face pressure to deliver high-quality parts while keeping production...

Which Casting Processes Should You Choose for Your Project?

The casting process is the first step of manufacturing, and it creates complex metal shapes for countless...

How to Avoid Hidden Costs in Prototype-to-Production CNC Machining for Automotive Suppliers

Prototype-to-production CNC machining for automotive suppliers requires more than just machining precision....

How to Reduce Tool Wear and Save on CNC Tooling Costs?

Tool wear causes nearly 20% of unexpected downtime in CNC shops. That downtime can cost thousands per...

How To Choose Right Forging Process for Your Needs

Choosing the Right Forging Process for Your Manufacturing Needs The world of manufacturing is brimming...

We'd love to Manufacture for you!

Submit the form below and our representative will be in touch shortly.

LOCATIONS

Registered Office

10-A, First Floor, V.V Complex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, India.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti, Coimbatore-641035, Tamil Nadu, India. ㅤ

Other Locations

GENERAL ENQUIRIES

FRIGATE is a B2B manufacturing company that facilitates New Product Development, contract manufacturing, parallel manufacturing, and more, leveraging its extensive partner networks.

Automotive OEM & Aftermarket

Aerospace & Defense

Electronics Manufacturing

Robotics & Automation Systems

Consumer Electronics

Medical Devices

Renewable Energy

Oil & Gas Equipment

Marine & Shipbuilding