Engine Oil Filter Adapters

Name: Engine Oil Filter Adapters | Oil Routing & Filter Mounts - Frigate
Price: 249.00 USD
Availability: InStock

Engine oil filter adapters are designed to endure cyclical thermal expansion, constant vibration, and long-term exposure to aggressive lubricants. To meet these demands, advanced adapters are manufactured from high-strength, precision-cast aluminum alloys or engineered composites with a controlled microstructure that resists fatigue cracking and corrosion.

Material Specification

Billet Aluminum (6061-T6), Cast Iron (DIN 1691), or Stainless Steel (AISI 304)

Engine Block Mounting Interface

SAE J518 Code 61/62 (4-bolt flange), OEM-specific bolt pattern, or NPT threaded (1/2”–1”)

Oil Filter Mounting Interface

Spin-on (M20x1.5, 3/4”-16 UNF), Remote-mount (AN-10/12), or Cartridge-style (O-ring sealed)

Dimensional Tolerances

±0.05mm (Bore alignment), ±0.1mm (Flange flatness)

Oil Port Configuration

Dual-port (Bypass/feed), Thermostat-integrated, or Turbo feed line (1/8” NPT)

Product Description

To further improve durability, surface treatments like hard anodizing or chemical passivation are applied. These coatings enhance resistance to pitting and galvanic corrosion, ensuring dimensional stability and dependable performance under high-temperature, high-pressure operating conditions.

Pressure Rating

10–100 psi (Standard), 150 psi (High-performance), 300 psi (Race)

Seal Material & Type

Viton O-rings (High-temp), PTFE gaskets, or Copper crush washers

Internal Flow Path Design

Straight-through (Low restriction), Bypass valve (15–25 psi), or Coolant-integrated (Oil cooler ports)

Corrosion Resistance/Coating

Hard Anodized (Aluminum), Nickel-plated (Steel), or Ceramic-coated (High-temp)

Certification Standards

ISO 4548 (Filter tests), SAE J20 (Fluid seals), ASME B16.5 (Flanges)

Technical Advantages

Internal geometries are engineered using computational fluid dynamics (CFD) to optimize oil flow paths, reducing turbulence and minimizing pressure drop across the adapter body. Flow-optimized channels and radiused transitions help maintain laminar flow, supporting rapid oil delivery to critical engine bearings and hydraulic lifters. This approach ensures consistent lubrication even during transient load conditions, safeguarding against localized starvation and thermal hotspots.

Adapter-to-block and filter-to-adapter interfaces are designed with precision-machined sealing lands and integrated O-ring grooves, accommodating high-durometer elastomers that retain elasticity under thermal cycling. Finite element analysis (FEA) validates stress distribution across sealing surfaces, reducing the risk of microleakage and gasket extrusion. This robust sealing strategy supports long service intervals and reduces the likelihood of oil seepage in both static and dynahttps://frigate.ai/supplychain/why-predictive-maintenance-is-the-key-to-reducing-equipment-downtime/mic operating conditions.

Let's Get Started

Need reliable Machining for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Industry Applications

Automotive internal combustion engines

Provides a secure interface for oil filtration and cooling, supporting high-volume production and tight dimensional tolerances required by OEMs.

Heavy-duty industrial machinery

Enables robust oil filtration in generators, compressors, and hydraulic systems, supporting extended service intervals and high contaminant loads.

Marine propulsion systems

Facilitates corrosion-resistant oil filtration and thermal management in marine engines operating under variable load and saltwater exposure.

Aerospace piston engines

Integrates with aircraft engine lubrication systems, allowing for high-efficiency filtration and sensor compatibility in aviation environments.

Power generation equipment

Supports filtration and cooling in stationary and mobile generators, ensuring oil cleanliness for reliable, long-duration operation.

Agricultural equipment

Provides modular filtration solutions for tractors and harvesters, accommodating high particulate loads and field-serviceable maintenance requirements.

Sensor Integration and Diagnostic Compatibility

Modern adapters incorporate standardized ports for pressure and temperature sensors, machined to tight tolerances to ensure leak-free sensor installation and accurate signal acquisition. Provisions for redundant sensor mounting and shielded wiring channels enable integration with advanced engine management systems, facilitating real-time diagnostic monitoring and predictive maintenance.

Engine Oil Filter Adapters bodies are designed with integrated heat sinks or extended surface features, enhancing convective heat transfer away from the oil stream. Material selection and wall thickness optimization contribute to effective thermal conduction, preventing oil degradation and maintaining viscosity stability during extended high-load operation.

Having Doubts? Our FAQ

Check all our Frequently Asked Question

How does adapter material selection affect thermal expansion and long-term sealing performance for Frigate applications?

Selecting an adapter material with a low coefficient of thermal expansion is critical for Frigate engines, as it maintains consistent gasket compression under wide temperature fluctuations and high vibration, preventing oil leaks and ensuring reliable sealing over extended operational cycles.

What impact does internal flow path geometry have on oil pressure and filtration efficiency in Frigate engine systems?

Optimized internal channel geometry in Frigate oil filter adapters reduces turbulence and minimizes pressure drop, guaranteeing stable oil pressure and efficient contaminant removal at varying engine speeds and loads, which is essential for mission-critical reliability.

How does the adapter interface accommodate pressure and temperature sensor integration for real-time diagnostics in Frigate platforms?

Precision-machined sensor ports on Frigate engine oil filter adapters, with standardized threads and sealing surfaces, enable secure and leak-free installation of pressure and temperature sensors, supporting accurate, real-time data acquisition for advanced engine health monitoring and predictive maintenance.

Why is anti-drain-back valve compatibility critical for preventing oil starvation at Frigate engine startup?

Engine Oil Filter Adapters compatible with anti-drain-back valves retain oil within the filter assembly of Frigate engines, ensuring immediate lubrication upon startup and significantly reducing wear during cold starts or after prolonged shutdowns in demanding marine environments.

What are the torque requirements for adapter installation to avoid deformation or improper sealing in Frigate applications?

Specified torque values for Frigate engine oil filter adapters ensure uniform gasket compression, preventing housing deformation and minimizing the risk of oil leaks under dynamic engine loads, thereby supporting operational safety and long-term component integrity.

Get Clarity with Our Manufacturing Insights

The Art and Science of Brass Metal Casting

Have you ever wondered why your brass components sometimes have defects like cracks or surface imperfections?...

A Buyer’s Guide to Sourcing Custom Toroidal Transformers in Bulk

Custom Toroidal Transformers are a critical part of many modern electronic systems. These components...

Buy CNC Machined Heat Sinks and Cooling Components – Best Materials & Suppliers

Electronics are becoming smaller and more powerful, which increases the risk of overheating. Without...

How to Master CNC Tolerance Selection Without Overpaying

Precision in CNC machining isn’t just about achieving tight dimensions—it’s about choosing the right...

How to Compare Lead Times and Costs for Offshore vs. Onshore CNC Machining Services?

The decision between Offshore vs. Onshore CNC Machining Services is no longer just a question of cost...

Best CNC Machining Practices for Achieving Consistent Thread Tolerances

Precision threading is critical in industries where reliability and performance depend on accurate mechanical...

Polishing and Buffing Techniques for Achieving Mirror Finishes in Machined Parts

Surface finish plays a critical role in how machined parts perform. From aerospace assemblies to surgical...

The Growing Importance of Cybersecurity in Manufacturing Operations

Are your manufacturing systems safe from cyber threats? Manufacturing is rapidly evolving, with...

How to Choose the Right CNC Machining Supplier for Heavy-Duty Components

Heavy-duty components are the backbone of aerospace, automotive, energy, and heavy machinery industries....

How Data-Driven Decision-Making in Manufacturing Improves Performance and Profitability

Are your production processes inefficient, leading to high costs and low productivity? Is it difficult...

We'd love to Manufacture for you!

Submit the form below and our representative will be in touch shortly.

LOCATIONS

Registered Office

10-A, First Floor, V.V Complex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, India.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti, Coimbatore-641035, Tamil Nadu, India. ㅤ

Other Locations

GENERAL ENQUIRIES

FRIGATE is a B2B manufacturing company that facilitates New Product Development, contract manufacturing, parallel manufacturing, and more, leveraging its extensive partner networks.

Automotive OEM & Aftermarket

Aerospace & Defense

Electronics Manufacturing

Robotics & Automation Systems

Consumer Electronics

Medical Devices

Renewable Energy

Oil & Gas Equipment

Marine & Shipbuilding