- EV Transformers
Transformers for EV Components
Frigate transformers use controlled capacitance, shielding, and nanocrystalline cores to suppress common-mode noise and transients in high dV/dt SiC/GaN EV power stages.
- Timely Dispatch
- Cost Efficiency
- Pre-Production Samples

- Reinforced Isolation Design
Frigate transformers ensure >4kV isolation using triple-insulated wire, high CTI materials, and meet IEC/automotive safety standards reliably.
- Low-Loss High-Frequency Magnetics
Core and winding designs minimize hysteresis, eddy current, and proximity losses for efficient operation up to 500kHz in EV converters.
- Magnetic Stability Under Stress
Material and structural choices ensure stable magnetic properties under thermal cycling, transients, and fault conditions in EV operating environments.
- Global Trust
Our Clients
Preferred by OEMs and system designers for transformer sourcing






























- Engineered Range
Our Products
Browse our transformer lineup built to support diverse voltage, insulation, and mounting needs across industries.
- Products Delivered
Feedback from Transformer Clients
Hear how procurement teams and engineering leads rate our transformer reliability, customization depth, and production consistency.
“Been using their dry-type units for the last 6 months. Build quality is solid. No overheating, no complaints.”
“Very smooth sourcing. Cords work fine. Packaging was neat also!”
“High frequency noise dropped significantly. We tested many suppliers but this part was very stable. Frigate team answered all specs questions quickly.”
“The units were delivered well-packed. Slight delay on customs but Frigate handled all communication quickly. Output stability is very reliable. Good value for money.”
“ Fire rating passed inspection, no trouble. Cables are flexible enough for tight runs. Cheers to Frigate.”
“We sourced this for an automotive application... Fitment exact. Thermal performance very clean. Price also reasonable. No issue so far! ”
“Cable is very tough... no crack during installation, even in outdoor condition. Shipment take 3 weeks, but product was good. We Source again sure.”
“ Frigate sent us samples Fast. The lamination is smooth, no burrs. Our assembly team had zero fitting issues.”
“ Delivery time was okay. The plastic molding finish on the plug could improve. But it works well. Good for bulk orders.”
“ We installed the busbars into our LV switchboards. Stable output readings and connection layout was compact. Better than our last supplier.”
- Real Impact
Words from Clients
See how global OEMs and sourcing heads describe their experience with our scalable execution.

“Quick turnaround and solid quality.”

“The instant quote tool saved us time, and the parts were spot-on. Highly recommend Frigate!”

“I would strongly recommend Frigate to anyone who wants to do Rapid Prototyping, and take their ideas to manufacturing. One firm doing all kinds of Product Development!”

“Great service, fair price, and the parts worked perfectly in our assembly.”

“Top-notch machining and fast shipping. Very satisfied with the results.”

“The next disruption is happening in Prototyping & Manufacturing on-demand and Frigate is leading the way! I personally believe the Frigate's way of IIOT enabled cloud platform with Al.”

“Frigate delivered high-quality parts at a competitive price. The instant quote tool is a huge plus for us!”

“We appreciate the precision and quality of the machined components in the recent delivery—they meet our specifications perfectly and demonstrate Frigate’s capability for excellent workmanship.”

“Flawless execution from quote to delivery.”

“I am absolutely happy to work with supplier like Frigate who were quite proactive & result oriented . Frigate has high willingness team who has strong know how & their passion towards the products & process were absolutely thrilling.”

“The precision on these parts is impressive, and they arrived ahead of schedule. Frigate’s process really stands out!”

“Parts were exactly as spec’d, and the instant quote made budgeting a breeze.”

“Good value for the money.”

“The finish was perfect, and the team was easy to work with.”

“Working with Frigate has been great. Their proactive, results-driven approach and expertise shine through in every project. It's been a pleasure collaborating with them.”

"We are highly satisfied with the timely delivery and quality of the MIG Welding Cable from Frigate. Their attention to detail, secure packaging, and quick responsiveness stood out. We confidently recommend Frigate Engineering Services Pvt. Ltd. as a reliable manufacturing partner."
- Power Domains
Functional Roles of Transformers in EV Power Architectures
Transformers in EV systems enable controlled energy transfer, galvanic separation, and signal fidelity across high- and low-voltage domains. We engineer them to maintain electrical stability under thermal, frequency, and transient stress conditions.
Gate Drive Signal Isolation
Enables galvanic separation between control and high-voltage switching stages, ensuring accurate gate signal transmission under high dV/dt conditions.
High-Frequency OBC Transfer
Supports high-efficiency LLC or HB topologies by minimizing core and copper losses during AC-DC conversion at 100–500kHz.



- Compact Magnetics
EMI Characterization and Control
Frigate designs transformers that support predictable EMI behavior in power converters through advanced layout-aware winding and shielding strategies.
Noise Control by Design
Transformers influence EMI signatures by leveraging techniques like flux cancellation, split bobbins, and symmetrical windings to minimize noise propagation paths.
EMC Compliance Integration
Measured S-parameters and noise data are validated against simulations, aligning with CISPR 25 and ISO 11452-2 compliance requirements in converter systems.
Full-Spectrum Transformer Solutions
Engineered for high-reliability environments, our EV Components transformers deliver precise voltage regulation, low leakage current, and superior EMI suppression.
- Power Reliability
Ensuring Optimal Performance in EV Transformers
Frigate delivers EV component transformers engineered for superior efficiency, precise voltage fidelity, and robust thermal management under extreme operational stresses. Each unit undergoes rigorous multi-parameter validation, ensuring uncompromised reliability, optimal performance, and lifecycle consistency in mission-critical electric vehicle systems.
- Our Blogs
Insights from Transformer Manufacturing Experts
Read technical articles on transformer integration, compliance standards and sourcing strategies across industry-specific use cases.
Frigate implements rigorous testing including thermal cycling, surge voltage, and insulation resistance tests per AEC-Q200 and IEC standards. Materials and components are sourced to automotive-grade specifications, ensuring long-term durability. Manufacturing processes incorporate statistical process control for consistency across batches. This comprehensive approach guarantees transformers withstand harsh EV operating conditions.
Frigate utilizes planar and toroidal core designs to maximize power density while maintaining electrical isolation. Precision winding techniques reduce inter-winding capacitance and leakage inductance, critical for high-frequency operation. Advanced magnetic materials with high saturation flux density are selected to reduce core volume. These innovations enable compact transformers suitable for space-constrained EV modules.
Frigate employs Litz wire with carefully selected strand diameter and strand count to combat skin and proximity effects. Winding geometries are optimized through 3D electromagnetic simulation to achieve balanced current distribution. The result is significantly lowered AC resistance and thermal hotspots. This optimization improves overall converter efficiency and transformer lifespan.
Frigate uses high-frequency impedance analysis and S-parameter measurements to characterize transformer behavior. Results are cross-validated with finite element magnetic and thermal simulations for accuracy. Transformers undergo accelerated life testing under dynamic switching loads to verify stability. This ensures consistent performance in demanding EV power electronics.
Frigate designs transformers with reinforced insulation layers and uses high Comparative Tracking Index (CTI) materials to prevent electrical breakdown. The creepage and clearance distances exceed automotive standard requirements for 800V and above systems. Epoxy encapsulation and potting compounds enhance mechanical robustness and dielectric strength. These features collectively secure safe operation across critical high-voltage boundaries.
We'd love to Manufacture for you!
Submit the form below and our representative will be in touch shortly.
LOCATIONS
Registered Office
10-A, First Floor, V.V Complex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, India.
Operations Office
9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti, Coimbatore-641035, Tamil Nadu, India. ㅤ
Other Locations
- Bhilai
- Chennai
- USA
- Germany