Engine mounts, chassis parts, and machined components for assembly lines.
High-strength fasteners, landing gear parts, and structural assemblies.
Forged housings, armor brackets, and mission-critical structural parts.
Precision housings, actuator frames, and armature linkages for automation systems.
Metal frames, brackets, and assemblies for appliances and home equipment.
Busbar holders, battery pack parts, and lightweight structural enclosures.
Solar mounting parts, wind turbine brackets, and battery enclosures.
Valve bodies, flange blocks, and downhole drilling components.
Large welded frames, PEB structures, and assemblies for industrial equipment.
Electrical devices built to deliver stable voltage and current for power distribution and equipment operation.
Manufactured to provide safe and consistent power delivery for electrical equipment and appliances.
Magnetic components designed to store energy, filter signals, and control current in electrical circuits.
Conductive products manufactured to transmit power or signals with consistent electrical performance.
Electrical bars designed for efficient current distribution in electrical panels and power systems.
Protective housings built to safeguard electrical and mechanical assemblies against operational stresses.
Continuous profiles produced with uniform cross-sections for structural, decorative, and functional applications.
Connection interfaces manufactured for secure pipe joining and leak-free performance in critical systems.
Fluid-handling units built to deliver consistent flow and pressure across industrial applications.
Flow control components engineered to regulate, isolate, or direct fluids in industrial systems.
High-accuracy metal parts produced for industries where performance depends on flawless detailing.
Custom-formed sheets with tight dimensional for sectors ranging from enclosures to structural components.
High-volume molded parts with consistent finish, suited for functional and consumer-grade products.
Metal components shaped to complex profiles for strength, detail, and material efficiency.
End-to-end part production from samples to bulk supply.
Ready-to-use assemblies built to exact fit and function.
Heavy-duty fabrication with high-strength materials for demanding applications. Robust welding for maximum structural durability.
Type B NEMA Power Cords use thermoset or XLPE insulation rated for 105°C operation, ensuring conductor and insulation integrity in high-density rack enclosures and sealed control panels. Maximum surface temperature rise remains within 30°C during 80% rated current draw, minimizing risk of thermal degradation in long-duration operation. Jacket materials are selected to resist thermal softening in passive-cooled environments.
Type B NEMA Power Cords are tested for dielectric breakdown voltage of 1500V AC (1 minute) between line and ground, conforming to IEC and UL insulation coordination. Cordsets with ferrite beads or shielded layers are available for environments with high-frequency EMI such as VFD-controlled machinery or RF-generating systems. Leakage current and insulation resistance are validated per ASTM D149 and IEC 60243.
Type B NEMA Power Cords incorporate nickel-plated brass blades with Rockwell hardness in the 110–125 HV range, ensuring minimal wear and stable insertion force over >500 mating cycles. Plug molding is rated for 35 lb axial pull without delamination or conductor separation. These cords meet retention force standards specified in NEMA WD-6 and ANSI C73.
Need reliable Heat Sinks for your next project? Get in touch with us today, and we’ll help you find exactly what you need!
Supplies 125V grounded AC to IT hardware; compatible with PDU-mounted IEC receptacles in data center and telecom enclosures.
Powers PLCs, HMIs, and contactor banks in UL508A panels; supports tight bend radius and stable thermal endurance under load.
Connects imaging systems and analyzers requiring grounded supply; supports EMI-sensitive environments with shielded conductor options for signal integrity.
Delivers stable AC power to stepper-driven fabrication systems; meets mechanical strain and heat tolerance during extended production cycles.
Interfaces with oscilloscopes, power analyzers, and calibration benches; offers low-leakage insulation and consistent ground bonding performance.
Provides grounded AC input for lab fans, pumps, and mixers; supports high duty cycles with thermoset jackets in corrosive environments.
Type B NEMA Power Cords with flat profile geometry support a minimum static bend radius of 5× the cable diameter, allowing dense routing in confined enclosures without exceeding mechanical strain limits. Low-profile plugs with 90° angled entries reduce rear clearance to under 32 mm, ideal for wall-mounted receptacles or rear-access panels in modular rack systems.
Type B NEMA Power Cords support nominal 125V AC operation with current ratings up to 15A depending on conductor size. Cordsets are available in 12 AWG, 14 AWG, and 16 AWG configurations with Class B stranding per ASTM B8, providing high flex fatigue life and stable ampacity under continuous load. Voltage drop remains under 3% at full rated current over 10 ft lengths.
Check all our Frequently Asked Question
Frigate uses low-impedance copper grounding conductors with crimp-and-soldered terminations to maintain mechanical and electrical integrity under vibration. Ground continuity is tested per UL 817 across dynamic flex cycles and thermal aging profiles. The molded plug body includes integrated ground path encapsulation to prevent open-ground conditions. These features ensure consistent bonding in control cabinets, lab instruments, and test systems.
Frigate manufactures cords with XLPE and high-grade PVC compounds rated for continuous use at 105°C ambient. These materials are selected for low dielectric loss and high thermal index to prevent jacket softening or insulation breakdown. Thermal performance is validated using IEC 60216 life extrapolation models. This makes the cords reliable in dense electrical enclosures and passive-cooled environments.
Each cord is HiPot tested at 1500V AC for 60 seconds between line, neutral, and ground conductors per UL and IEC insulation coordination standards. Leakage current is measured to remain within <0.25 mA at rated voltage. Frigate performs 100% end-of-line testing using automated dielectric test rigs with digital traceability. This ensures suitability for sensitive instruments and isolated power domains.
Frigate uses nickel-plated brass blades hardened to 110–125 HV to maintain dimensional stability under repeated insertions. The molded plug is designed with strain-relieved entry points tested to withstand axial loads >35 lbs without conductor separation. Blade engagement force and withdrawal resistance comply with NEMA WD-6 tolerances. These design elements reduce mechanical failure in high-cycle installations.
Frigate offers Type B cords with optional ferrite beads and shielded layers to suppress conducted emissions in EMI-sensitive applications. Conductors are laid with precise twist pitch to reduce loop area and minimize differential-mode interference. These EMC-optimized variants are used in medical analyzers, broadcast racks, and RF test benches. Testing follows CISPR 11 and EN 55011 Class A/B profiles as needed.
Submit the form below and our representative will be in touch shortly.
10-A, First Floor, V.V Complex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, India.
9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti, Coimbatore-641035, Tamil Nadu, India. ㅤ
Need reliable wires and cables for your next project? Get in touch with us today, and we’ll help you find exactly what you need!
Need reliable Machining for your next project? Get in touch with us today, and we’ll help you find exactly what you need!