Type H Power Cords

Name: UV-Resistant Type H Power Cords | IS 16A3 Plug Cable - Frigate
Price: 249.00 USD
Availability: InStock

Type H Power Cords are designed to meet SI 32 (Israeli standard) specifications with exact prong geometry and grounding alignment. These cords pflegen 100% compatibility with Israeli 16A/250V outlets, ensuring direct connectivity without the risk of mechanical or electrical mismatch. The plug interface is manufactured with tight dimensional tolerances to avoid insertion loss, arcing, or loose contact under varying load conditions.

Rated Voltage

250V AC

Rated Current

16A

Conductor Material

Electrolytic-grade copper, ≥99.99% purity

Conductor Class

Class 5 fine-stranded (IEC 60228)

Conductor Resistance

≤0.018 Ω/m at 20°C

Product Description

Type H Power Cords support nominal 250V at 16A, engineered for continuous operation under full load with +10% voltage variance tolerance. Conductor cores are composed of 99.99% electrolytic-grade copper with low resistance (≤0.018 Ω/m), allowing efficient transmission with minimal thermal rise. Tested to IEC 60884-1, the cords remain stable under transient voltage conditions typical in Israeli grid systems.

Insulation Resistance

≥10⁹ Ω at 500V DC (after 1 minute)

Dielectric Strength

2.5 kV AC for 1 minute (Hi-pot tested)

Insulation Material

PVC or Rubber, compliant with IEC 60227/60245

Jacket Material

Thermoplastic (PVC) or Thermoset, RoHS compliant

Operating Temperature Range

-25°C to +70°C

Plug Pin Material

Nickel-plated brass, corrosion-resistant

Contact Resistance (Plug Terminals)

≤30 mΩ

Strain Relief Tensile Strength

≥60N axial pull resistance

Flame Retardancy

IEC 60332-1 compliant

±0.05 mm (per SI 32 standard plug configuration)

Technical Advantages

Type H Power Cords use double-layer thermoplastic or thermoset insulation, compliant with IEC 60227 and IEC 60245. The insulation system withstands dielectric breakdown at ≥2.5 kV RMS, providing sufficient clearance and creepage for high-pollution environments. Flame-retardant materials (IEC 60332-1) ensure resistance to ignition in confined enclosures or heat-prone installations.

Type H Power Cords are available with Class 5 fine-stranded copper conductors, enabling repeated flexing over 30,000 cycles without conductor fracture or insulation breach. Cables include overmolded strain reliefs tested to withstand axial pull forces exceeding 60N, preserving termination integrity in high-movement or suspended configurations. Jacket materials maintain tensile strength above 13.5 MPa post-heat aging at 136°C.

Let's Get Started

Need reliable Heat Sinks for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Industry Applications

Medical Equipment Integration

Type H Power Cords provide stable 250V/16A input for diagnostic and imaging devices designed for Israeli-standard hospital power infrastructure.

Telecommunications Infrastructure

Used in switchboards and base station equipment requiring Type H plug compatibility for uninterrupted operation under Israeli power grid specifications.

Industrial Automation Panels

Support 16A-rated industrial controllers and PLC cabinets using Israeli-standard outlets, ensuring stable power delivery in high-load automation environments.

Data Center Equipment

Deliver power to servers, UPS systems, and PDUs where Israeli Type H sockets are deployed in IT and telecom-grade racks.

Commercial HVAC Units

Enable direct connection of HVAC controllers and drive systems using Type H Power Cords rated for full-load inductive startup currents.

Test and Measurement Systems

Connect laboratory oscilloscopes, signal generators, and analyzers to Israeli-standard 250V outlets, ensuring low-leakage power input in sensitive circuits.

Conductivity and Power Loss Management

Type H Power Cords minimize power dissipation via high-conductivity copper strands with class 2 or 5 flexibility and precision extrusion. Voltage drop is limited to <3% over 5 meters at 16A, verified through four-point Kelvin resistance measurements. Shielding options can be incorporated to reduce EMI in sensitive load applications.

Type H Power Cords are resistant to UV, ozone, oils, and mild industrial chemicals, with jackets passing IEC 60811-404 for oil resistance and EN 50396 for ozone durability. The insulation system shows no brittleness after 168-hour exposure at 70°C in synthetic oil. Suitable for both indoor and light outdoor use with optional weatherproof variants.

Having Doubts? Our FAQ

Check all our Frequently Asked Question

How does Frigate ensure insulation reliability in Type H Power Cords used in high-humidity environments?

Frigate uses insulation compounds tested to IEC 60227 with a volume resistivity >10¹³ Ω·cm even at 90% relative humidity. The outer sheath is thermally extruded to prevent micro-cracking or moisture ingress. All cords undergo a 24-hour humidity chamber test at 60°C and high RH. This ensures stable dielectric strength and no leakage current rise under wet conditions.

What type of copper conductors does Frigate use in Type H Power Cords for low resistance performance?

Fregatte uses Class 5 high-conductivity electrolytic copper with purity ≥99.99%. The conductors are drawn and annealed to maintain flexibility and resist oxidation. Resistance per meter is kept below 0.018 Ω, verified by four-point measurement. This reduces heat buildup and improves efficiency under continuous high current loads.

How are Frigate’s Type H Power Cords tested for high-voltage dielectric breakdown?

Each cord is tested at 2.5 kV RMS for 1 minute as per IEC 60320 standards. Hi-pot testing ensures no flashover, insulation puncture, or arc propagation. Frigate logs these results in digital batch records for traceability. Cords that fail any dielectric test are rejected at source before packaging.

Can Frigate supply custom-length Type H Power Cords with molded C13 or C15 connectors?

Yes, Frigate offers lengths from 0.3 m to 10 m with molded IEC 60320 C13, C15, or unterminated ends. All terminations are tested for polarity, continuity, and pull strength ≥60N. The molding process uses precision dies to ensure strain relief and IP20 ingress protection. Custom labeling and batch trace codes are also available on request.

What standards and certifications do Frigate's Type H Power Cords comply with for export use?

Frigate manufactures Type H Power Cords in full compliance with SI 32, IEC 60884-1, RoHS, and REACH directives. Products also meet CE marking criteria for the EU market. Each shipment includes test reports and Certificate of Conformity (CoC). Frigate provides material safety datasheets and insulation tracking indices upon request.

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

The Top Reasons Medical Parts Fail in Machining FDA Inspection

When it comes to medical devices, precision isn’t a luxury. It’s a requirement. Every small part must...

Buy CNC Machining Robotics Components – Key Factors to Consider

The robotics industry demands extreme precision. Every movement in a robotic system relies on tightly...

Where to Buy CNC Machined Dental Implant Components - Cost and Compliance

Manufacturing dental implant components requires strict dimensional control. Tolerances often fall within...

How to Evaluate CNC Machining Partners for Scalability in Production Runs

Scalability in modern manufacturing is not merely about increasing volumes. It demands maintaining consistent...

Buy CNC Titanium Machining Parts for Healthcare Applications – High-Precision Manufacturing

Titanium has become an indispensable material in modern healthcare, revolutionizing the manufacturing...

How to Compare CNC Machining Suppliers Based on TAT and Quality Assurance

CNC machining is everywhere. It shapes the parts inside cars, airplanes, medical devices, and even the...

Find 5-Axis CNC Machining Services – When to Use 5-Axis Capabilities

Are you facing trouble getting precision parts with complex shapes made accurately? Do your parts require...

Best Fictiv Alternatives Compared for Global Manufacturing needs

The need for fast turnarounds, DFM-focused engineering support, and flexible production capacity has...

How CNC Machining Bottlenecks Are Resolved in Your Production Line

Manufacturers face persistent production challenges. Inefficiencies in machining, material waste, inconsistent...

PUR Cables for Dynamic Motion – The Go-To Choice in Industrial Cable Supply

Global manufacturing and automation continue to push mechanical systems to move faster, smarter, and...

Wir freuen uns auf Herstellung für Sie!

Füllen Sie das untenstehende Formular und unser Vertreter wird Sie in Kürze.

LOCATIONS

Sitz

10-A, First Floor, V. V Komplex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, Indien.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti Coimbatore-641035, Tamil Nadu, Indien. ㅤ

Type H Power Cords

Rated Voltage

Rated Current

Conductor Material

Conductor Class

Conductor Resistance

Product Description

Insulation Resistance

Dielectric Strength

Insulation Material

Jacket Material

Operating Temperature Range

Plug Pin Material

Contact Resistance (Plug Terminals)

Strain Relief Tensile Strength

Flame Retardancy

±0.05 mm (per SI 32 standard plug configuration)

Technical Advantages

Let's Get Started

Industry Applications

Conductivity and Power Loss Management

Ähnliche Produkte

Australian Plug Power Cords

USB-A to Lightning/Micro-USB Cords

EV AC Charging Cord

High Amp Rated Power Cords

Swiss Plug Power Cords

Having Doubts? Our FAQ

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

Wir freuen uns auf Herstellung für Sie!

LOCATIONS

Sitz

Operations Office

Weitere Standorte

ALLGEMEINE ANFRAGEN

Funktionen

Unternehmen

Type H Power Cords

Get Latest Price

Type H Power Cords

Get Latest Price