Slip-On Flanges

Managing inconsistent weld quality, alignment gaps, and pressure rating mismatches often delays sourcing Slip-On flanges for repeat production. Our Slip-on flanges solve this with hub-fit control, dual-side weld compatibility, and consistent thickness as per ASME or EN norms.

Standard Specification

ASME B16.5, ASME B16.47, EN 1092-1, DIN 2576, ANSI, MSS SP-44, API 6A

Pressure Rating

Class 150, 300, 600, 900 (PN6 to PN40 for EN standards)

Material

Carbon Steel (ASTM A105), Stainless Steel (ASTM A182 F304/F316), Alloy Steel (ASTM A694 F52)

Nominal Size

½” to 24″ (DN15 to DN600) [Custom sizes up to 48″ (DN1200) available]

Flange Type

Slip-On (SO) – Fits over pipe and welded inside/outside

Product Description

Each unit supports Class 150 to 900 and sizes from ½” to 24″, with tight-tolerance machining for easier line-up. We also offer customizable ODs, facings, and surface finishes to support non-standard pipe assemblies and legacy retrofits.

Facing Type

Raised Face (RF), Flat Face (FF)

Dimensions

Customizable (OD, Thickness, Bore Size)

Bolt Circle Diameter

ASME B16.5: Standardized per class/size; EN 1092-1: Metric series

Number & Size of Bolt Holes

4 to 24 holes (½” to 1″ bolts, custom patterns available)

Surface Finish

Smooth machined (125–250 RA), Serrated (Stock finish)

Corrosion Resistance

SS316: High resistance; Carbon Steel: Epoxy-coated/galvanized

Temperature Rating

-29°C to +400°C (lower than WN flanges due to double-weld design)

Material Certification

MTR, EN 10204 3.1/3.2, PED 2014/68/EU

Gasket Compatibility

Flat ring gaskets (non-metallic), Spiral-wound (for higher pressure)

Coating/Plating

HDG, Xylan, PTFE, Electroless Nickel (optional)

Manufacturing Method

Forged (ASTM A105/A182), Machined from plate (ASME SA516)

Technical Challenges

Our Slip-On flanges come with raised or flat face options for pipe face tolerance flexibility. Machined from forged blanks or SA516 plate, we pflegen bore size matching within ±0.5mm to reduce turbulence.
We include MTR, EN 10204 3.1, or PED certifications as per customer request for each lot. Optional coatings like PTFE, Xylan, or Electroless Nickel support corrosive or offshore conditions.

Let's Get Started

Need reliable Flanges for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Industry Applications

Pressure Piping in Oil and Gas

Supports low-to-medium pressure headers with quick field welding using standard Class 300-rated flanges in ASTM A105 and A694 F52.

Power Plant Condensate Systems

Used in mild vacuum zones with epoxy-coated carbon steel flanges, fitted with spiral-wound gaskets for thermal stress management.

Fire Protection Pipeline Networks

Preferred for Class 150 PN10 fire loop assemblies using galvanized slip-on flanges that enable low-cost replacements and fast coupling.

Skid-Mounted Pump Assemblies

Supports short bolt circles and flat face mounting for ANSI-compliant pump outlet flanges in mobile and containerized units.

Chiller Water Systems in HVAC Plants

Common in chilled or condenser water loops using EN 1092-1 DN flanges with rubber gaskets and epoxy-painted surfaces.

Chemical Transfer Lines

Compatible with stainless steel F304/F316 material in low-corrosive lines, ensuring steady line pressure without costly threaded or socket fittings.

Built for Assembly-Critical Flow Lines

We pflegen tight hub-to-pipe tolerances and weld-friendly grooves to speed up site welding and reduce rework. With Class 150 to 900 and PN6 to PN40 variants, you can match global project specs without redesign.
Custom OD, bolt pattern, or facing modifications are available in batch runs for OEM kits. Each order includes inspection logs, dimensional charts, and coating compatibility notes for audit-ready shipment.

Having Doubts? Our FAQ

Check all our Frequently Asked Question

Can you match the slip-on flange with our existing bolt pattern or non-standard OD?

Yes, we support custom OD and bolt circle adjustments based on provided drawings or mating flange samples. Our machining team aligns bore and thickness tolerances to match without compromising flange face integrity. This allows seamless fitment in legacy systems or project-specific pipe spools.

Are double-side welds mandatory for pressure integrity on Slip-On flanges?

Yes, both inner and outer welds are needed to pflegen pressure sealing as per ASME or EN guidelines. We design the hub length and pipe insertion depth to allow sufficient weld volume on both sides. This avoids leaks during thermal expansion or cyclic loading.

Can you provide coating certificates or test reports for offshore or chemical zone use?

Yes, we share coating batch numbers with test reports for HDG, Xylan, PTFE, or electroless nickel finishes. These include salt spray results and adhesion tests when required by offshore specs. Each report is tagged to its corresponding flange batch.

How do you control flange flatness during bulk manufacturing?

We machine flange faces using calibrated lathes and check warpage using dial gauge and flatness jigs. Deviations are kept within 0.3mm for raised face and 0.2mm for flat face. Flatness reports can be issued upon request.

Can your Slip-On flanges be used for vacuum or low-pressure gas lines?

Yes, for low-pressure gas or vacuum systems, we offer FF or smooth face options with compatible gaskets. Material selection and welding length are adjusted to reduce leak paths under mild suction. Surface finish below 125 RA can also be provided for gasket sealing support.

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

Supply Chain : The key challenges and strategies of Frigate to address complex issues

Strategies for Complex Supply Chain Management The modern business manufacturing is a tough. Globalized...

Where to Find CNC Machining Services for Automotive Safety Parts that Offering Integrated Inspection

Automotive safety parts must meet strict standards for structural performance and dimensional accuracy....

Fully Integrated Supply Chains with Contract Manufacturers for Greater Business Agility

Have you ever faced delayed shipments, unexpected costs, or a complete breakdown in communication with...

A Quick Comparison of Costs for Various Casting Methods?

By understanding the various casting methods and their cost considerations, you can make an informed...

Understanding CNC Tolerances and Surface Finishes in Machining

Precision is the cornerstone of modern manufacturing. Even the smallest dimensional deviation can lead...

How to Choose the Right EV Wiring Harness for Better Charging Efficiency and Performance?

Wiring harness technology must evolve as the electric vehicle (EV) industry moves toward higher power...

Material and Surface Finish Requirements for CNC Machining Food-Grade Components

Selecting the right materials and surface finishes for CNC machining in food-grade applications is essential...

Cloud Manufacturing Services for Real-Time Procurement Management

Have you ever faced delays in getting the right products at the right time? Or have you struggled to...

How to Address Surface Finish Defects in Oil & Gas CNC Components

Surface finish quality plays a crucial role in the performance and safety of Oil & Gas CNC Components....

How Quick Turn Molding Prototypes Simplify Small-Batch Production

Bringing a new product to market is no longer just about having a great idea; it’s about how fast that...

Wir freuen uns auf Herstellung für Sie!

Füllen Sie das untenstehende Formular und unser Vertreter wird Sie in Kürze.

LOCATIONS

Sitz

10-A, First Floor, V. V Komplex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, Indien.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti Coimbatore-641035, Tamil Nadu, Indien. ㅤ

Slip-On Flanges

Standard Specification

Pressure Rating

Material

Nominal Size

Flange Type

Product Description

Facing Type

Dimensions

Bolt Circle Diameter

Number & Size of Bolt Holes

Surface Finish

Corrosion Resistance

Temperature Rating

Material Certification

Gasket Compatibility

Coating/Plating

Manufacturing Method

Technical Challenges

Let's Get Started

Industry Applications

Built for Assembly-Critical Flow Lines

Ähnliche Produkte

Weld Neck Flanges

Socket Weld Flanges

Threaded Flanges

Lap Joint Flanges

Long Weld Neck Flanges

Having Doubts? Our FAQ

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

Wir freuen uns auf Herstellung für Sie!

LOCATIONS

Sitz

Operations Office

Weitere Standorte

ALLGEMEINE ANFRAGEN

Funktionen

Unternehmen

Slip-On Flanges

Get Latest Price

Slip-On Flanges

Get Latest Price