Danish Plug Power Cords

Name: Optimized Danish Plug Power Cords | IEC C13 Plug - Frigate
Price: 249.00 USD
Availability: InStock

Danish Plug Power Cords adheres strictly to DS 60884-2-D1 standards, ensuring precise fit with Type K sockets. The plug incorporates the asymmetric earth pin design required for Danish installations, preventing misalignment or grounding failure. These cords guarantee mechanical and electrical compatibility with socket systems used across Denmark and Greenland, essential for equipment destined for local deployment or export.

Plug Standard

DS 60884-2-D1 (Type K – Danish Standard)

Rated Voltage

250V AC

Rated Current

10 A

Earth Pin Offset

8.6 mm ± 0.2 mm (lateral displacement from centerline)

Contact Material

Nickel-plated brass (CuZn40Pb2)

Product Description

Danish Plug Power Cord integrates an offset earth pin with strict dimensional tolerances to pflegen robust ground connection under varying insertion angles. This design mitigates failure risks associated with improper grounding, especially in Class I equipment. Applications involving protective earth continuity testing benefit from the predictable grounding performance of this configuration.

Contact Resistance

≤ 0.03 Ω at 20°C

Dielectric Strength

2000V AC for 1 minute

Insulation Resistance

≥ 100 MΩ/km @ 500V DC

Conductor Type

Class 5 fine-stranded oxygen-free copper

Conductor Cross Section

3G1.0 mm² or 3G1.5 mm² (H05VV-F / H07RN-F)

Cable Sheath Material

PVC (Type TM2) or Neoprene Rubber (Type EM2)

Operating Temperature Range

-25°C to +70°C (PVC) / -25°C to +90°C (Rubber)

Flexing Endurance

Pre-phase engagement, dual system (clips and pin contact)

Flammability Rating

IEC 60332-1 (Vertical flame propagation compliant)

30–70 N (as per mating cycle standards for Type K sockets)

Technical Advantages

Danish Plug Power Cord utilizes nickel-plated brass terminals offering contact resistance below 0.03 ohms. These terminals ensure minimal heat rise at rated current loads, maintaining thermal stability during continuous operation. For equipment operating at 250V AC and 10A, thermal endurance of plug contacts prevents connector fatigue and derating over time.

Danish Plug Power Cord is equipped with overmolded strain reliefs tested to withstand over 10,000 bend cycles at 180° rotation. This ensures mechanical robustness in dynamic cable routing environments such as movable equipment carts or panel-mounted installations. Enhanced flex life of H05VV-F or H07RN-F cables maintains insulation integrity under vibration or repetitive motion.

Let's Get Started

Need reliable Heat Sinks for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Industry Applications

Medical Diagnostic Equipment

Used in IEC 60601-compliant systems requiring secure Type K plug interface and reliable grounding for patient-connected electrical devices.

Analytical Laboratory Instruments

Supports precision instruments with stable 250V AC supply, ensuring consistent power delivery during voltage-sensitive testing operations.

Telecommunication Server Racks

Powers communication infrastructure with reinforced strain reliefs and thermal-resistant contacts in 24/7 rack-mounted environments.

Industrial Automation Panels

Interfaces with Type K power distribution for PLC panels, ensuring proper grounding and electrical isolation in factory floor conditions.

Test and Measurement Benches

Connects calibrated systems requiring low-contact-resistance power entry and insulation stability for metrology and quality assurance labs.

Scientific Refrigeration Units

Supplies regulated power to temperature-controlled chambers where plug retention force and dielectric strength are critical.

Reduced Inventory Complexity via Configurable Builds

Danish Plug Power Cord can be specified with multiple cable types, lengths, and connector terminations while maintaining a standardized internal build matrix. This modular approach allows procurement teams to streamline part numbers across regional variants, reducing SKU fragmentation and simplifying compliance documentation for multinational deployments.

Danish Plug Power Cord is serialized at batch level and includes test records for hi-pot, insulation resistance, and visual inspection. Each batch conforms to RoHS, REACH, and EN 50525 requirements, allowing traceable documentation for equipment certifications. Availability of Declaration of Conformity and lot-based inspection results supports audit-ready procurement workflows.

Having Doubts? Our FAQ

Check all our Frequently Asked Question

How does Frigate ensure dimensional accuracy in Danish Plug Power Cord manufacturing?

Frigate uses high-precision injection molds calibrated to DS 60884-2-D1 specifications for the Danish Plug Power Cord. Each plug geometry is verified using coordinate measuring machines (CMM) to pflegen ±0.1 mm tolerance. This ensures proper mechanical mating with Type K sockets and eliminates misfit during assembly. Dimensional reports are archived per batch for traceability.

What quality checks does Frigate perform on Danish Plug Power Cord insulation?

Frigate conducts 100% hi-pot testing at 2kV AC for every Danish Plug Power Cord. Insulation resistance is measured to verify it exceeds 100 MΩ/km at 500V DC. These tests ensure long-term dielectric stability under electrical stress. All results are logged under ISO 9001-compliant quality systems.

How does Frigate validate thermal performance of Danish Plug Power Cord contacts?

Frigate uses thermographic analysis to observe heat rise at full-rated current across the contact interface. The Danish Plug Power Cord is qualified to operate under continuous load without exceeding IEC-specified terminal temperature thresholds. Contact plating and crimping methods are optimized for thermal efficiency. Thermal test data is part of the qualification dossier.

Can Frigate customize Danish Plug Power Cords for equipment-specific routing constraints?

Yes, Frigate offers configurable output orientations and cable lengths for Danish Plug Power Cord assemblies. Custom strain relief angles and plug orientations help maintain clearance in constrained enclosures. Cable jackets can be selected based on bend radius or abrasion resistance. Frigate supports these modifications without compromising compliance or certification.

How does Frigate manage traceability for Danish Plug Power Cord shipments?

Every Danish Plug Power Cord manufactured by Fregatte includes batch-level serialization and production lot traceability. Material certifications, electrical test results, and process records are maintained for ten years. This supports audits and regulatory compliance for medical, industrial, or telecom sectors. Documentation is available digitally upon request.

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

How to Ensure Quick Turn Molding Quality with Tight Deadlines

As industries strive to meet tighter product development timelines, a significant challenge arises –...

A Buyer’s Guide to Sourcing Custom Toroidal Transformers in Bulk

Custom Toroidal Transformers are a critical part of many modern electronic systems. These components...

How HDPE Injection Molding Reduces Material Wastage and Boosts Cost Efficiency

Material wastage is a critical issue in manufacturing that silently drains profitability. With rising...

B2B Manufacturing Solutions for Global Supply Chain Companies

What’s Holding Back Your Global Supply Chain Success? Is your organization struggling with unpredictable...

How to Avoid CNC Machining Vibration Issues in Components

Precision drives CNC machining, but machining vibration issues can quietly disrupt everything. Even with...

Best CNC Machining Providers for Aircraft Structural Components - Avoiding Fatigue Failures

Aircraft structures must endure long service cycles, fluctuating pressures, and high vibration loads....

How to Ensure Dimensional Accuracy in Large CNC Machined Parts

Precision in large CNC machined parts is critical for industries such as aerospace, defense, energy,...

CNC Machining Medical Devices Supplier – Ensuring Precision & Compliance

Sourcing parts for CNC machining medical devices is not just about precision. It requires strict process...

The Lifecycle of CNC Parts Explained – From Raw Material to Product

CNC Parts drive precision across industries—from satellites to surgical tools. They are engineered to...

Industrial Metal Stamping Solutions for Heavy-Duty Applications

Have you ever wondered how manufacturers produce complex, durable components quickly and efficiently?...

Wir freuen uns auf Herstellung für Sie!

Füllen Sie das untenstehende Formular und unser Vertreter wird Sie in Kürze.

LOCATIONS

Sitz

10-A, First Floor, V. V Komplex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, Indien.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti Coimbatore-641035, Tamil Nadu, Indien. ㅤ

Danish Plug Power Cords

Plug Standard

Rated Voltage

Rated Current

Earth Pin Offset

Contact Material

Product Description

Contact Resistance

Dielectric Strength

Insulation Resistance

Conductor Type

Conductor Cross Section

Cable Sheath Material

Operating Temperature Range

Flexing Endurance

Flammability Rating

30–70 N (as per mating cycle standards for Type K sockets)

Technical Advantages

Let's Get Started

Industry Applications

Reduced Inventory Complexity via Configurable Builds

Ähnliche Produkte

USB-C PD Power Cords

PDU Power Cords

Locking Power Cords

Italian Plug Power Cords

UK Plug Power Cords

Having Doubts? Our FAQ

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

Wir freuen uns auf Herstellung für Sie!

LOCATIONS

Sitz

Operations Office

Weitere Standorte

ALLGEMEINE ANFRAGEN

Funktionen

Unternehmen

Danish Plug Power Cords

Get Latest Price

Danish Plug Power Cords

Get Latest Price