Multistage Centrifugal Pumps

When high head requirements exceed standard pump capabilities, selecting the wrong system can lead to frequent breakdowns and high power losses. Our Multistage Centrifugal Pumps handle heads up to 1,500 meters while keeping your energy use balanced.

Flow Rate Range

1 m³/h to 1,500 m³/h (4.4 GPM to 6,600 GPM)

Pressure/Head Capacity

Up to 1,500 meters (4,921 feet) – Adjustable via number of stages

Power Requirements

0.75 kW to 2,500 kW (1 HP to 3,350 HP), 2-pole/4-pole motors, 50/60 Hz, VFD compatible

Materials of Construction

Casing: Cast Iron, Stainless Steel (SS 304/316), Ductile Iron Impellers: Bronze, SS 316, Carbon Steel, Plastics (PP/ETFE)

Fluid Compatibility

Clean Water, Boiler Feed, Chemicals, Oils, High-Temperature Liquids (material-dependent)

Product Description

Many facilities struggle with pump vibration, seal leakage, or poor efficiency at scale. We supply compact, stage-adjustable models with strong metallurgy and efficient impellers to pflegen continuous operation in demanding lines.

Temperature Range

-30°C to +210°C (-22°F to 410°F) – Special seals/materials for extreme temps

Connection Types & Sizes

Flanged (ANSI/DIN), Threaded (BSP/NPT), sizes: 25 mm to 300 mm (1″ to 12″)

Mounting Configuration

Horizontal or Vertical, Close-Coupled or Long-Coupled (baseplate-mounted)

Seal System

Balanced Mechanical Seal (Single/Double), Gland Packing, Cartridge Seal

Efficiency Rating

80% to 92% (depends on stages, design, and fluid)

NPSH Required

1.5 m to 5 m (5 ft to 16.4 ft) – Lower for first-stage impeller designs

Speed Range

1,450 RPM to 3,600 RPM (higher speeds for compact high-pressure models)

Solids Handling Capability

Clean Liquids Only (max 50 ppm abrasives, optional hardened materials)

Certifications & Standards

API 610, ISO 5199, EN 733, ANSI/ASME B73.3, ATEX (explosive environments)

Operating Noise Level

< 75 dB(A) (low vibration due to balanced rotor design)

Coupling System

Flexible Coupling (Spacer Type), Direct Drive, or Belt-Driven Options

Technical Advantages

Your plant’s reliability depends on pumps that deliver high head without compromising shaft life or seal quality. Multistage centrifugal pumps use flexible coupling or direct-drive options with support for VFD tuning across various head conditions.
Double mechanical seals and oil-lubricated bearings allow smooth runs in high-pressure setups. You also get flanged and threaded connections in multiple sizes to fit piping layouts without rework.

Let's Get Started

Need reliable Flanges for your next project? Get in touch with us today, and we’ll help you find exactly what you need!

Industry Applications

Boiler Feed Systems

Pumps pflegen constant pressure in steam systems with water temperatures above 180°C, meeting thermal shock resistance needs.

Chemical Transfer Lines

Stainless steel options resist corrosion from chlorinated and acidic fluids used in closed-loop dosing circuits.

Reverse Osmosis Plants

Multistage models ensure stable membrane pressure across multiple banks with flow adjustments as low as 1 m³/h.

Oil Refineries

Ductile iron or carbon steel builds withstand hot hydrocarbon feed and meet ANSI/ASME mechanical integrity standards.

Power Generation Facilities

Spacer-coupled pumps with cartridge seals handle demineralized water feeding to turbine loops under continuous duty.

High-Rise HVAC Systems

Compact vertical units push chilled or hot water across 40+ floors, saving floor space in utility rooms.

Long-Term Operating Value

Production setups with changing flow needs require pumps that adapt without frequent service. We supply multistage centrifugal pumps with scalable staging, high-efficiency curves, and NPSH values starting at 1.5 meters.
You can select builds with SS 316, bronze, or carbon steel internals depending on your fluid media. These pumps support quiet operation under 75 dB and meet API, ISO, and EN standards for industrial use.

Having Doubts? Our FAQ

Check all our Frequently Asked Question

Can I configure the number of stages to match my system head requirements?

Yes, we adjust the number of impellers to meet specific head targets without oversizing the motor. This flexibility helps you avoid wasted energy and unnecessary pressure buildup. We supply stage layouts based on your system curve.

Will high inlet temperatures affect pump sealing or material lifespan?

High inlet temperatures can degrade seals and casing unless properly selected. We use temperature-rated materials and compatible seal types for fluids up to 210°C. You get thermal stability without sacrificing uptime or replacement cycles.

Can you provide pumps with both horizontal and vertical mounting in the same specification set?

Yes, we offer dual-format mounting with matching hydraulic performance. This allows easy adaptation based on available floor space or piping layout. Your design team doesn’t need to rework layout drawings later.

How do you address issues with vibration or imbalance at higher speeds?

We use dynamically balanced rotors and close-run impeller tolerances to minimize vibration at 3,600 RPM. Couplings also include spacer-type or direct-drive options to isolate movement. This reduces bearing stress and helps extend service intervals.

Can multistage centrifugal pumps handle intermittent solids or abrasive trace elements in the fluid?

Yes, we support up to 50 ppm abrasive load using hardened internals on request. This prevents early wear without altering core design or flow characteristics. You get extended runtime in process streams with minor contamination.

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

How Quality Assurance in Forging Improves Your ROI

Do you ever wonder why your forging process might cost more than expected? You’ve invested in expensive...

The Advantages of Aluminum Injection Molding for Lightweight Parts

Have you ever wondered why some products are so heavy? Or why is there a struggle to make lightweight...

How Does Injection Molding Work? A Comprehensive Guide

Are you struggling to find a manufacturing process that delivers high-quality parts quickly and affordably?...

Understanding Plastic Injection Molding for Your Manufacturing Needs

From toy blocks to space shuttle turbine blades, plastic injection molding is a part of our daily life....

Best CNC Machining Services for Complex Geometry Oil & Gas Valve Components

Complex geometry in oil and gas valve components presents significant manufacturing challenges. These...

How to Compare Lead Times and Costs for Offshore vs. Onshore CNC Machining Services?

The decision between Offshore vs. Onshore CNC Machining Services is no longer just a question of cost...

Best CNC Machining Partners for Large-Scale Manufacturing - Price and Capacity Guide

Precision manufacturing demands accuracy, repeatability, and efficiency—especially when production scales...

Fire-Resistant Cables – Ensuring Safety, Compliance, and Continuity in Critical Infrastructure

For organizations managing critical infrastructure, fire risk is a matter of safety and operational resilience....

Where to Order CNC Machined Electronic Enclosures with Short Lead Times

Short lead times matter in electronics production. Delays in enclosure supply often stall product assembly,...

Breaking Down Injection Molding Costs: What You Need to Know

If you’re in manufacturing, you’ve probably faced the challenge of managing production costs....

Wir freuen uns auf Herstellung für Sie!

Füllen Sie das untenstehende Formular und unser Vertreter wird Sie in Kürze.

LOCATIONS

Sitz

10-A, First Floor, V. V Komplex, Prakash Nagar, Thiruverumbur, Trichy-620013, Tamil Nadu, Indien.

Operations Office

9/1, Poonthottam Nagar, Ramanandha Nagar, Saravanampatti Coimbatore-641035, Tamil Nadu, Indien. ㅤ

Multistage Centrifugal Pumps

Flow Rate Range

Pressure/Head Capacity

Power Requirements

Materials of Construction

Fluid Compatibility

Product Description

Temperature Range

Connection Types & Sizes

Mounting Configuration

Seal System

Efficiency Rating

NPSH Required

Speed Range

Solids Handling Capability

Certifications & Standards

Operating Noise Level

Coupling System

Technical Advantages

Let's Get Started

Industry Applications

Long-Term Operating Value

Ähnliche Produkte

End Suction Centrifugal Pumps

Vertical Turbine Pumps

Self-Priming Centrifugal Pumps

ANSI Process Pumps

API 610 Centrifugal Pumps

Having Doubts? Our FAQ

Holen Sie sich Klarheit mit Unserem Manufacturing Insights

Wir freuen uns auf Herstellung für Sie!

LOCATIONS

Sitz

Operations Office

Weitere Standorte

ALLGEMEINE ANFRAGEN

Funktionen

Unternehmen

Multistage Centrifugal Pumps

Get Latest Price

Multistage Centrifugal Pumps

Get Latest Price